{"product_id":"icp-hot-surface-igniter-kit-for-rgs101ltca0aaa-oem-1171306-ships-today","title":"ICP Hot Surface Igniter Kit for RGS101LTCA0AAA — OEM 1171306 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine OEM hot surface igniter (part number 1171306) with its matching wiring kit (part number 1188370) is the ignition source for the ICP \/ Tempstar \/ Heil RGS101LTCA0AAA gas furnace. On each call for heat, the furnace control board sends voltage to the igniter, which glows red-hot and lights the gas at the burners. Hot surface igniters are made from a brittle silicon material and are the most common furnace failure point — they degrade with every heating cycle and eventually crack or stop glowing. The included wiring kit ensures a clean, factory-correct electrical connection so the new igniter receives the proper voltage. A no-heat call with the blower running and no flame is almost always a failed igniter.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (Igniter), 1188370 (Wiring Kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS101LTCA0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct-fit replacement for the ICP Tempstar Heil RGS101LTCA0AAA. This igniter and wiring kit combination is used across many ICP-built RGS-series gas furnaces and related Tempstar, Heil, Comfortmaker, and Arcoaire models. Verify the igniter's mounting style and connector against your existing part before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off gas and disconnect power to the furnace. Verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector and remove the mounting screw. Handle the old igniter only by its ceramic base — never touch the glowing element area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new 1171306 igniter using the supplied 1188370 wiring kit, keeping fingers off the silicon element to avoid contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, start a heat call, and confirm the igniter glows and lights the burners reliably.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs but burners never ignite (no heat)\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow when inspected during a heat call\u003c\/li\u003e\n\u003cli\u003eVisible cracks or breaks in the igniter element\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after repeated failed ignition attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027661275507,"sku":"1171306","price":51.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047683703155,"sku":"1171306-GEN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_2feec263-691c-495c-8819-f49806a7af2c.jpg?v=1782893694","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs101ltca0aaa-oem-1171306-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}