{"product_id":"icp-hot-surface-igniter-for-wugf060ag01-silicon-carbide-120v-ships-today-1","title":"ICP Hot Surface Igniter for WUGF060AG01 — Silicon Carbide 120V | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM hot surface igniter (part number 606996, \"IGNITOR X\") for the ICP \/ Tempstar \/ Heil WUGF060AG01 gas furnace. The hot surface igniter glows red-hot on each call for heat to light the gas at the burners. It runs on 120V and is a high-wear consumable: its silicon carbide element weakens with every ignition cycle and ultimately cracks or fails open. A failed igniter means the furnace cannot light, leaving the home without heat. Watch for no flame on a heat call, the furnace locking out after several attempts, or the control board flashing an ignition-failure code. The element is brittle, so even minor mishandling or thermal shock can crack it and end its service life.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e606996 (Ignitor X)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil \/ Comfortmaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement\u003c\/td\u003e\n\u003ctd\u003eSilicon Carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirectly fits the ICP \/ Tempstar \/ Heil WUGF060AG01 upflow gas furnace and many other ICP-family furnaces that use the 606996 igniter. Confirm your existing igniter part number and bracket\/plug style before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and bracket position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness connector and remove the mounting screw(s). Handle by the ceramic base only — never touch the gray element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter so the element sits in the burner flame path, reattach the screw(s), and reconnect the plug per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace will not ignite or produces no flame on a call for heat.\u003c\/li\u003e\n\u003cli\u003eVisible crack, blistering, or white powder on the igniter element.\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows red during the ignition sequence.\u003c\/li\u003e\n\u003cli\u003eControl board reports an ignition-failure or lockout fault code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027200885107,"sku":"606996","price":42.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047678951795,"sku":"606996-GEN","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-606996_6a17bc4a-8eaa-4ca9-9220-427d1d522fbc.jpg?v=1782893387","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wugf060ag01-silicon-carbide-120v-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}