{"product_id":"icp-hot-surface-igniter-for-wugb080af01-silicon-nitride-oem-606996-ships-today-1","title":"ICP Hot Surface Igniter for WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe ICP hot surface igniter (OEM #606996) is the direct-replacement ignition source for the WUGB080AF01 gas furnace. When the thermostat calls for heat, the control board energizes this igniter, which glows to roughly 1,800–2,500°F and lights the gas at the burners. A cracked, carbon-fouled, or electrically open igniter is among the most frequent causes of a furnace that will not produce heat. Common symptoms include the furnace cycling without lighting, an igniter that glows but never lights the burners, repeated lockouts, or no glow at all. Rated for 120V and built to OEM specification, this silicon-nitride-style igniter delivers dependable, long-life ignition.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e606996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Heil \/ Tempstar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eIGNITOR X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eWUGB080AF01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis igniter is a direct OEM fit for the ICP\/Heil\/Tempstar WUGB080AF01 gas furnace and shares the same part number across many comparable ICP-family gas furnaces (Comfortmaker, Arcoaire, KeepRite). Confirm OEM part number 606996 against your existing igniter before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting bracket and wire harness routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw(s), and carefully withdraw the old igniter without touching the brittle element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter in the same position (handle the ceramic base only, never the element), secure the screw, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace cycles or clicks but burners never ignite\u003c\/li\u003e\n\u003cli\u003eIgniter glows weakly or not at all\u003c\/li\u003e\n\u003cli\u003eVisible cracks, hot spots, or carbon buildup on the element\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts or flashing control-board fault codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027201704307,"sku":"606996","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047678132595,"sku":"606996-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-nitride-606996_8c9c11d7-f3b3-4d1f-8337-d44d265a8e25.jpg?v=1782893357","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wugb080af01-silicon-nitride-oem-606996-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}