{"product_id":"icp-hot-surface-igniter-for-wpg4364060rka1-w-control-board-ships-today","title":"ICP Hot Surface Igniter for WPG4364060RKA1 — w\/ Control Board | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM ignition kit for the ICP (Tempstar \/ Heil \/ Comfortmaker) WPG4364060RKA1 packaged unit includes the hot surface igniter (P\/N 1177663) and the igniter control board (P\/N 1186861). On a call for heat, the control board sends power to the igniter, which glows red-hot to ignite the gas at the burners. The hot surface igniter is a high-wear part — its silicon carbide or silicon nitride element becomes brittle with each heating cycle and eventually cracks, leaving the furnace unable to light. Symptoms of a failed igniter include the inducer running but no burner flame, repeated lockouts, or a visibly cracked igniter element. Replacing the igniter and control board together restores reliable, on-demand ignition.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1177663 (igniter), 1186861 (control board)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eBurner ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter control board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas furnace \/ packaged unit heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM fit for the ICP WPG4364060RKA1 packaged unit and other Tempstar, Heil, and Comfortmaker models using this hot surface igniter and igniter control board. Handle the igniter element only by its ceramic base — skin oils shorten its life.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner\/control compartment access panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photo the igniter mounting and all board wiring before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter; swap the control board if included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter without touching the element, reconnect the harness, and seat the control board per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then watch a full ignition sequence to confirm the igniter glows and the burners light.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInducer runs but burners never ignite\u003c\/li\u003e\n\u003cli\u003eVisible crack or break in the igniter element\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows on a call for heat\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after several failed ignition attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021513539955,"sku":"1186861","price":54.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047673184627,"sku":"1186861-GEN","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1186861_f0b0d112-f04c-447d-9b11-af9d99bb78e0.jpg?v=1782893203","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wpg4364060rka1-w-control-board-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}