{"product_id":"icp-hot-surface-igniter-for-wpg3362090lkb1-oem-1175974-igniter-assembly-ships-today-1","title":"ICP Hot Surface Igniter for WPG3362090LKB1 — OEM 1175974 Igniter Assembly | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine OEM hot surface igniter assembly (part number 1175974) is the factory ignition component for the ICP\/Tempstar\/Heil WPG3362090LKB1 gas furnace. The hot surface igniter receives a low-voltage signal from the furnace control board at the start of each heating cycle, heats to roughly 2,000°F, and ignites the gas as it flows from the burner manifold. It is one of the most frequently replaced wear parts in modern gas furnaces because the brittle silicon-carbide or silicon-nitride element naturally degrades with each ignition cycle. Common failure symptoms include no ignition, a furnace that clicks but never lights, repeated lockouts after three or four ignition attempts, or a visibly cracked, chipped, or no-longer-glowing element. Installing a fresh OEM igniter assembly restores reliable startup and prevents nuisance no-heat calls.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1175974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Type\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eWPG3362090LKB1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGenuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct-fit replacement for the ICP\/Tempstar\/Heil WPG3362090LKB1 furnace. As an OEM assembly it includes the correct mounting bracket and wire harness so it drops into the factory location without modification. Always confirm your OEM part number matches 1175974 before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas supply, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wire routing before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a full heat cycle and confirm the igniter glows and the burners light.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace will not ignite or locks out after several attempts\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows orange-white when commanded\u003c\/li\u003e\n\u003cli\u003eVisible cracks, chips, or hot spots on the element\u003c\/li\u003e\n\u003cli\u003eIntermittent no-heat that comes and goes with temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027221987699,"sku":"1175974","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047666106739,"sku":"1175974-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1175974_b7dc1159-9445-409f-958a-3e3b28c8fe2d.jpg?v=1782892972","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wpg3362090lkb1-oem-1175974-igniter-assembly-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}