{"product_id":"icp-hot-surface-igniter-for-wpg3362060rkb1-oem-1175974-igniter-assembly-ships-today","title":"ICP Hot Surface Igniter for WPG3362060RKB1 — OEM 1175974 Igniter Assembly | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine OEM hot surface igniter assembly (part number 1175974) is the factory ignition component for the ICP\/Tempstar\/Heil WPG3362060RKB1 gas furnace. At the start of each heating cycle the furnace control board sends low voltage to the igniter, which heats to roughly 2,000°F and lights the gas as it exits the burner manifold. Because the silicon-carbide or silicon-nitride element grows brittle with every ignition, the hot surface igniter is one of the most commonly replaced furnace wear parts. Watch for symptoms like no ignition, a furnace that clicks but never lights, repeated lockouts after three or four failed attempts, or an element that no longer glows or is visibly cracked or chipped. Installing a fresh OEM igniter assembly restores dependable startup and eliminates frustrating no-heat calls.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1175974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Type\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eWPG3362060RKB1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGenuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct-fit replacement for the ICP\/Tempstar\/Heil WPG3362060RKB1 furnace. As an OEM assembly it includes the correct mounting bracket and wire harness, so it installs in the factory location without modification. Confirm your OEM part number matches 1175974 before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas supply, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and withdraw the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a full heat cycle, and confirm the igniter glows and the burners light.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace will not ignite or locks out after several attempts\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows orange-white when commanded\u003c\/li\u003e\n\u003cli\u003eVisible cracks, chips, or hot spots on the element\u003c\/li\u003e\n\u003cli\u003eIntermittent no-heat that comes and goes with temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021531529587,"sku":"1175974","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047665942899,"sku":"1175974-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1175974_c78acf4a-9fb8-43c1-b870-47016c900ec5.jpg?v=1782892966","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wpg3362060rkb1-oem-1175974-igniter-assembly-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}