{"product_id":"icp-hot-surface-igniter-for-wfml110c048b3-oem-kit-ships-today-1","title":"ICP Hot Surface Igniter for WFML110C048B3 — OEM Kit | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter assembly is a direct fit for ICP Tempstar Heil furnace WFML110C048B3. It covers the complete ignition group — igniter (part #1176919), igniter mounting bracket (part #1183455), and the HSI snap\/valve component (part #1176929, 36J24618). The igniter glows red-hot when the control board calls for heat, igniting the gas at the burners. Because it is the most cycled component in the ignition system, the silicon element eventually develops hairline cracks and stops glowing. Typical failure signs are a furnace that runs the inducer and waits but never lights, repeated lockouts after three or four ignition attempts, or a visibly cracked or whitened igniter element.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHSI Snap Part Number\u003c\/td\u003e\n\u003ctd\u003e1176929 (36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned for ICP Tempstar Heil model WFML110C048B3 and shared across ICP-family gas furnaces (Comfortmaker, Arcoaire, KeepRite) that use this 120V hot surface ignition platform. Confirm the existing igniter style and bracket footprint before installing.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and shut off the gas; verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring, plug location, and bracket orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the bracket screws, and lift the old igniter out — handle the new element by the ceramic base only, never the silicon tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter and bracket, reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and gas, then watch a full ignition cycle to confirm a steady glow and burner light-off.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but burners never ignite\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after 3–4 failed ignition tries\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow or glows weakly\u003c\/li\u003e\n\u003cli\u003eVisible cracks, blistering, or white spots on the element\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027240862067,"sku":"1183455","price":55.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047656210803,"sku":"1183455-GEN","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_39887adc-a661-4043-adc6-6b43739b0b72.jpg?v=1782892765","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wfml110c048b3-oem-kit-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}