{"product_id":"icp-hot-surface-igniter-for-wfhr060b024a1-furnace-hsi-ships-today-1","title":"ICP Hot Surface Igniter for WFHR060B024A1 — Furnace HSI | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis genuine OEM hot surface igniter (part number 1176919) is the factory ignition source for the ICP \/ Tempstar \/ Heil WFHR060B024A1 furnace. On a heat call the control board energizes the igniter, which glows white-hot to light the gas burners. Igniters are the most common furnace failure point because the silicon-carbide or silicon-nitride element grows brittle with every heating cycle and eventually cracks or burns open. Typical symptoms are a furnace that clicks and runs the inducer but never lights, a glowing igniter that produces no flame, or a unit that locks out after several failed ignition attempts. Replacing the igniter restores reliable burner light-off. This listing also covers the matching igniter mounting bracket (1177210) so the new element seats in the correct position relative to the burners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1177210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter (HSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil \/ Comfortmaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Burner Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eBuilt as the direct factory replacement for the ICP-family model WFHR060B024A1 and the broader line of ICP, Tempstar, Heil, and Comfortmaker gas furnaces that use this hot surface igniter and bracket assembly. Match the connector and mounting bracket to your original before installing.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off gas and disconnect electrical power, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position and wire routing before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness and unscrew the igniter\/bracket from the burner assembly. Handle the new element by the ceramic base only — never touch the glow surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter on its bracket, set the proper gap to the burner, and reconnect the harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then watch a full ignition cycle for a clean, immediate light.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIgniter glows but burners never light\u003c\/li\u003e\n\u003cli\u003eNo glow at all on a heat call\u003c\/li\u003e\n\u003cli\u003eVisible crack, blister, or break in the element\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after repeated ignition retries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027244466547,"sku":"1177210","price":41.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047652966771,"sku":"1177210-GEN","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1177210_f976bc21-590d-4773-af87-4c3fd3013c34.jpg?v=1782892691","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-wfhr060b024a1-furnace-hsi-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}