{"product_id":"icp-hot-surface-igniter-for-vnk075f14b1-silicon-nitride-ignitor-sensor-ships-today","title":"ICP Hot Surface Igniter for VNK075F14B1 — Silicon Nitride Ignitor\/Sensor | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter (part number 1009524, IGNITOR\/SENSOR HSP SK) is the ignition component for your ICP Tempstar Heil VNK075F14B1 gas furnace. When the thermostat calls for heat, the control board sends voltage to this igniter, which glows red-hot to light the burner gas. This silicon-nitride style kit is engineered to withstand thousands of rapid heat-up cycles and resist the cracking and warping that ends the life of older silicon-carbide igniters. When an igniter fails, the furnace will go through its ignition sequence but never light, leaving you with no heat. Common failure symptoms include a furnace that clicks and runs the inducer but produces no flame, repeated lockouts after several ignition attempts, or a visibly cracked or blistered igniter element.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1009524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eIGNITOR\/SENSOR HSP SK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter (silicon nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eVNK075F14B1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned as a direct OEM replacement for the ICP Tempstar Heil VNK075F14B1 furnace. ICP-family equipment (including Tempstar, Heil, and Comfortmaker branded units) frequently shares this igniter platform across similar 75,000 BTU input gas furnace models. Always confirm your existing part number before ordering.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off gas and disconnect power at the furnace switch and breaker. Verify zero voltage with a multimeter before touching any component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter bracket position and wire routing before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw(s), and carefully lift out the old igniter without touching the new element with bare hands (skin oils shorten its life).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter in the exact bracket position, reconnect the plug, and confirm the element sits in the burner flame path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a heat cycle and verify the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs the inducer and clicks but never lights the burners.\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts (often after 3 failed attempts).\u003c\/li\u003e\n\u003cli\u003eVisible cracks, blisters, or breaks in the igniter element.\u003c\/li\u003e\n\u003cli\u003eNo glow visible during the ignition sequence.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021623345523,"sku":"1009524","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047650247027,"sku":"1009524-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-nitride-1009524_e078a207-cb7b-4e5c-9d68-02cb66bf6305.jpg?v=1782892626","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-vnk075f14b1-silicon-nitride-ignitor-sensor-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}