{"product_id":"icp-hot-surface-igniter-for-rgx048krxa0aaa-silicon-nitride-oem-1171306-ships-today","title":"ICP Hot Surface Igniter for RGX048KRXA0AAA — Silicon Nitride OEM 1171306 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the OEM hot surface igniter (part number 1171306) for the ICP\/Tempstar\/Heil RGX048KRXA0AAA gas furnace. The hot surface igniter glows red-hot at the start of each heating cycle to ignite the gas at the burners. When the thermostat calls for heat, the control board energizes the igniter, and once it reaches operating temperature the gas valve opens and the burners light. A worn or cracked igniter is one of the most common causes of no-heat calls. Typical symptoms include the furnace blowing cold air, the igniter never glowing, clicking at the gas valve with no flame, or the furnace locking out after several failed ignition attempts. The brittle igniter element degrades with every cycle, making it a normal maintenance and wear item.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGX048KRXA0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct-fit replacement for the ICP\/Tempstar\/Heil RGX048KRXA0AAA furnace and other models that originally shipped with igniter 1171306. Confirm your existing part number and bracket orientation before installing.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and mounting bracket position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIgniter does not glow when the furnace calls for heat\u003c\/li\u003e\n\u003cli\u003eFurnace blows cold air or locks out after several tries\u003c\/li\u003e\n\u003cli\u003eVisible cracks or breaks in the igniter element\u003c\/li\u003e\n\u003cli\u003eClicking at the gas valve with no flame\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027268321651,"sku":"1171306","price":42.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047648641395,"sku":"1171306-GEN","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-nitride-1171306_ca282ff3-7a2e-4712-a65e-c1dec0bcd3dd.jpg?v=1782892583","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgx048krxa0aaa-silicon-nitride-oem-1171306-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}