{"product_id":"icp-hot-surface-igniter-for-rgs102hdbb0aaa-oem-kit-with-wiring-harness-ships-today","title":"ICP Hot Surface Igniter for RGS102HDBB0AAA — OEM Kit with Wiring Harness | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM hot surface igniter for the ICP Tempstar Heil RGS102HDBB0AAA gas furnace, supplied with the matching igniter wiring kit (OEM 1188370). The hot surface igniter (OEM 1171306) is the component that glows red-hot on a heat call to ignite the burner gas. It is one of the most common furnace failure points: the brittle silicon-carbide or silicon-nitride element cracks from thermal cycling, contamination, or rough handling, and once it fails the furnace can no longer light. Typical symptoms include a furnace that runs the inducer and blower but produces no heat, repeated ignition lockouts (often signaled by a flashing control-board LED), or a glow that no longer appears at the igniter. Replacing the igniter together with its wiring kit restores a clean, reliable connection and avoids intermittent faults caused by heat-degraded leads and connectors.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter), 1188370 (wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS102HDBB0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter + igniter wiring kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned as a direct-fit OEM replacement for the ICP Tempstar Heil RGS102HDBB0AAA furnace. ICP-family equipment (Heil, Tempstar, Comfortmaker, Arcoaire) shares many components, but always confirm the OEM part number against your unit before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch\/breaker and verify zero voltage with a multimeter. Shut off the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw(s), and lift the old igniter out without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter (handle by the ceramic base only, never the element), install the new wiring kit, and reconnect per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo heat — inducer and blower run but burners never light.\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockout or a flashing fault code on the control board.\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows, or is visibly cracked, pitted, or blistered.\u003c\/li\u003e\n\u003cli\u003eIntermittent ignition that worsens over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027654426995,"sku":"1171306","price":51.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047627768179,"sku":"1171306-GEN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_c77f153d-f1ed-41ad-8089-aee83d63f00b.jpg?v=1782892144","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgs102hdbb0aaa-oem-kit-with-wiring-harness-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}