{"product_id":"icp-hot-surface-igniter-for-rgs091stca0aaa-furnace-ignitor-with-wiring-kit-ships-today","title":"ICP Hot Surface Igniter for RGS091STCA0AAA — Furnace Ignitor with Wiring Kit | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter (part #1171306) is the original-equipment ignition component for the ICP\/Tempstar\/Heil RGS091STCA0AAA gas furnace, supplied with the matching igniter wiring kit (#1188370). The igniter is a silicon-carbide or silicon-nitride element that glows red-hot when energized, lighting the burner gas during each heating cycle. It is one of the most common furnace failure points: the brittle element cracks from thermal cycling, contamination, or rough handling, and once it fails the furnace will not produce heat. Typical symptoms include no ignition, a furnace that cycles on the inducer and gas valve but never lights, a visibly cracked or broken igniter, or a unit that locks out after several failed ignition attempts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter), 1188370 (wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas furnace ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter + wiring harness kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eEngineered as the factory-correct igniter for the ICP\/Tempstar\/Heil model RGS091STCA0AAA and shared chassis variants in the same furnace family. Always confirm the part number on your existing igniter and bracket before ordering.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw(s), and lift the old igniter out without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Seat the new igniter in the bracket, handling it only by the ceramic base, install the wiring kit, and reconnect per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs the inducer and clicks the gas valve but never ignites\u003c\/li\u003e\n\u003cli\u003eVisibly cracked, chipped, or broken igniter element\u003c\/li\u003e\n\u003cli\u003eNo glow when the igniter should energize\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts after several attempts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027669696883,"sku":"1171306","price":55.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047624655219,"sku":"1171306-GEN","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_64120865-68f9-403d-8bf7-f3398d3ca448.jpg?v=1782892057","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgs091stca0aaa-furnace-ignitor-with-wiring-kit-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}