{"product_id":"icp-hot-surface-igniter-for-rgs091htaa0aaaa-silicon-nitride-oem-1171306-ships-today","title":"ICP Hot Surface Igniter for RGS091HTAA0AAAA — Silicon Nitride OEM 1171306 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter (part number 1171306) is the direct ignition source for the ICP \/ Heil \/ Tempstar RGS091HTAA0AAAA gas furnace. When a heat call is initiated, the control board energizes the igniter, which glows hot enough to ignite the gas at the burners. This kit also includes the matching igniter wiring harness (part number 1188370) so you can replace a cracked or corroded connector at the same time. A failed igniter is one of the most common causes of a no-heat furnace: the element develops hairline cracks from thermal cycling, finally breaks open electrically, and the furnace locks out before it can light. Replacing the igniter restores reliable, on-demand ignition.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter), 1188370 (wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Heil \/ Tempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS091HTAA0AAAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for the ICP \/ Heil \/ Tempstar \/ Comfortmaker RGS091HTAA0AAAA furnace and other models from the same family that call for OEM igniter 1171306 with wiring kit 1188370. Always confirm the part number on your existing igniter before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter. Handle the new element by its ceramic base only — skin oils can shorten its life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Seat the new igniter in the burner bracket, secure the screw, and connect the new wiring kit per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a heat cycle, and confirm the igniter glows and lights the burners cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs but burners never light (no heat).\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow during a heat call.\u003c\/li\u003e\n\u003cli\u003eVisible cracks, breaks, or white-spotted corrosion on the element.\u003c\/li\u003e\n\u003cli\u003eFurnace locks out and requires repeated resets before lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027677299059,"sku":"1171306","price":42.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047623115123,"sku":"1171306-GEN","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-nitride-1171306_9df2f5b9-efb4-4719-9926-b83f3775193a.jpg?v=1782892010","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgs091htaa0aaaa-silicon-nitride-oem-1171306-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}