{"product_id":"icp-hot-surface-igniter-for-rgs091hfab0aaaa-oem-1171306-with-wiring-kit-ships-today","title":"ICP Hot Surface Igniter for RGS091HFAB0AAAA — OEM 1171306 with Wiring Kit | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter (part number 1171306) is the factory ignition component for the ICP\/Tempstar\/Heil RGS091HFAB0AAAA gas furnace, and this listing includes the matching igniter wiring kit (1188370). When the furnace calls for heat, the igniter energizes at 120V and glows red-hot to light the burner gas. Hot surface igniters are among the most frequently replaced furnace parts because the brittle silicon-carbide\/silicon-nitride element fractures over repeated heating and cooling cycles. Typical symptoms of a failed igniter include no ignition, the furnace attempting to light but never firing, the blower pushing cold air, lockout on ignition failure, or visible cracks and white hot-spots on the element. Replacing the wiring kit alongside the igniter renews heat-damaged leads and connectors at the same time.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (Igniter), 1188370 (Wiring Kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct OEM fit for the ICP\/Tempstar\/Heil RGS091HFAB0AAAA gas furnace. Confirm your model and serial tag, and verify the existing igniter part number when possible, before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, verify zero voltage with a multimeter, and shut off the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wiring connector before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the harness, remove the mounting screw(s), and withdraw the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter in the same orientation, install the new wiring kit, and reconnect per your photo. Handle the element by the ceramic base only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power and watch a full ignition cycle to confirm the igniter glows and the burner lights.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace fails to ignite or locks out on ignition failure.\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow or glows weakly\/unevenly.\u003c\/li\u003e\n\u003cli\u003eVisible cracks, white spots, or pitting on the element.\u003c\/li\u003e\n\u003cli\u003eIntermittent no-heat calls, especially on cold mornings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027679199603,"sku":"1171306","price":44.2,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047622361459,"sku":"1171306-GEN","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_5bce2a94-61d4-41d9-905e-9eff231932d7.jpg?v=1782891987","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgs091hfab0aaaa-oem-1171306-with-wiring-kit-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}