{"product_id":"icp-hot-surface-igniter-for-rgs090staa0agaa-tempstar-heil-furnace-ships-today","title":"ICP Hot Surface Igniter for RGS090STAA0AGAA — Tempstar\/Heil Furnace | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter (part #1171306) is the ignition source for the ICP \/ Tempstar \/ Heil RGS090STAA0AGAA 90,000 BTU gas furnace. On each call for heat the furnace control board energizes the igniter, which glows to roughly 2,000°F and lights the burner gas. This listing ships with the matching igniter wiring kit (part #1188370) so you have the harness and connector needed for a clean, code-correct replacement. A cracked element or open circuit is one of the most common no-heat failures on this furnace — symptoms include the igniter never glowing, glowing but the burners failing to light, or the furnace locking out after several ignition retries.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter), 1188370 (wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS090STAA0AGAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas furnace ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter + wiring kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect-fit OEM replacement for the ICP\/Tempstar\/Heil RGS090STAA0AGAA gas furnace. The 1171306 igniter and 1188370 wiring kit are also used across many ICP-family RGS, NGS and comparable induced-draft furnace platforms — match your old part number before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace blower\/burner service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw, and lift the old igniter out without touching the silicon-nitride element with bare fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter, install the wiring kit, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and cycle a call for heat; confirm the igniter glows and the burners light within the trial-for-ignition window.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIgniter never glows on a call for heat.\u003c\/li\u003e\n\u003cli\u003eVisible crack or hot spot in the element.\u003c\/li\u003e\n\u003cli\u003eFurnace ignites then locks out, or short-cycles on ignition failure.\u003c\/li\u003e\n\u003cli\u003eCold air from registers with the blower running but no flame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027681395059,"sku":"1171306","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047621968243,"sku":"1171306-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_0c4300db-95cf-4189-90f2-cf1b0f09d52a.jpg?v=1782891971","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-for-rgs090staa0agaa-tempstar-heil-furnace-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}