{"product_id":"icp-hot-surface-igniter-electrode-for-rgs303htaa0aaaa-oem-1179966-ships-today","title":"ICP Hot Surface Igniter Electrode for RGS303HTAA0AAAA — OEM 1179966 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe ICP igniter electrode (OEM part 1179966) is the ignition component that initiates the burner flame in your ICP, Heil, and Tempstar RGS303HTAA0AAAA gas furnace. On every call for heat the control board energizes this electrode to ignite the gas at the burner. When the electrode cracks, carbons over, or loses its glow, the furnace will lock out after several failed ignition attempts and the system will stop producing heat. Common failure symptoms include no ignition, repeated lockouts, delayed ignition with a small \"poof,\" or an error code on the control board indicating ignition failure. This is a genuine OEM electrode built to the exact resistance and positioning specifications of the original.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1179966\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eIgnitor Electrode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface \/ Electrode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Heil \/ Tempstar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Burner Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis igniter electrode is a direct OEM fit for the ICP\/Heil\/Tempstar RGS303HTAA0AAAA gas furnace. It is also used across many ICP-family RGS-series furnaces that share the same burner assembly. Always confirm your model and serial number against the part before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then shut off the gas supply. Verify zero voltage with a multimeter before touching any component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Disconnect the igniter lead, remove the mounting screw(s), and carefully withdraw the old electrode from the burner. Handle by the bracket only — never touch the igniter element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new electrode in the same position and gap, reconnect the lead per your photo, and secure the bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a heat cycle and confirm clean, immediate ignition.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace ignites intermittently or not at all\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts or ignition-failure error codes\u003c\/li\u003e\n\u003cli\u003eDelayed ignition with a noticeable \"poof\" of gas\u003c\/li\u003e\n\u003cli\u003eVisible cracks, carbon buildup, or a weak\/no glow on the element\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027274809715,"sku":"1179966","price":44.2,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047620198771,"sku":"1179966-GEN","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1179966_508d74d8-033c-4770-8059-d4e944a8e4db.jpg?v=1782891911","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-electrode-for-rgs303htaa0aaaa-oem-1179966-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}