{"product_id":"icp-hot-surface-igniter-electrode-for-rgs213hraa0aaaa-ships-today","title":"ICP Hot Surface Igniter Electrode for RGS213HRAA0AAAA | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine OEM ignitor electrode (part 1179966) for the ICP \/ Tempstar \/ Heil RGS213HRAA0AAAA gas furnace. The hot surface igniter is the element the control board energizes at the start of every heat cycle; it heats to a glowing temperature and lights the gas as the valve opens. It is the single most-replaced furnace part because the brittle silicon-carbide\/nitride element degrades with every ignition cycle and eventually cracks or loses continuity.\u003c\/p\u003e\n\u003cp\u003eWhen the igniter fails, the furnace typically goes through its full sequence — inducer runs, board calls for ignition — but no flame appears, then it locks out. You may see no glow at all, a weak or partial glow, or the furnace lighting only after several retries. Because the element is fragile and oils from bare fingers can shorten its life, always handle the new igniter by its ceramic base only.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1179966\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter Electrode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS213HRAA0AAAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas furnace ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect-fit for the ICP RGS213HRAA0AAAA and shared across many Tempstar, Heil, and Comfortmaker furnaces using this igniter electrode. Confirm the mounting bracket and connector match your original before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position and wire routing before removing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector and remove the mounting screw(s); handle only by the ceramic base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter (touching only the base), align it to the burner, and reconnect the plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, start a heat cycle, and confirm the element glows and lights the burners.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace sequences but produces no flame, then locks out\u003c\/li\u003e\n\u003cli\u003eNo glow or only a weak\/partial glow at the igniter\u003c\/li\u003e\n\u003cli\u003eVisible cracks or chips in the igniter element\u003c\/li\u003e\n\u003cli\u003eFurnace lights only after multiple ignition retries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027322650995,"sku":"1179966","price":41.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047612924275,"sku":"1179966-GEN","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1179966_bec7962c-0740-45c6-a4d2-b43130c6ef85.jpg?v=1782891644","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-electrode-for-rgs213hraa0aaaa-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}