{"product_id":"icp-hot-surface-igniter-electrode-for-rgs210leea0aaaa-direct-spark-ships-today","title":"ICP Hot Surface Igniter Electrode for RGS210LEEA0AAAA — Direct-Spark | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine OEM igniter electrode (Part No. 1179966) is the ignition component for the ICP \/ Tempstar \/ Heil RGS210LEEA0AAAA. The electrode delivers the high-voltage spark that lights the burner gas at the start of every heat cycle and, on many designs, also serves as the flame-sensing element that proves the burner has lit. Over time the electrode tip erodes, cracks, or develops carbon and oxide buildup, causing weak or missed ignition. A failing igniter electrode is one of the most common causes of a furnace that clicks, tries to light, then locks out on ignition failure. Installing a fresh OEM electrode restores reliable first-try ignition and proper flame rectification.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1179966\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIgniter \/ Spark Electrode Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSpark Ignition \u0026amp; Flame Sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBracket-mount at burner assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBuilt as the factory replacement for the ICP RGS210LEEA0AAAA furnace. It is also a direct fit for compatible Tempstar, Heil, and Comfortmaker models that use the 1179966 igniter electrode. Verify the OEM part number and bracket geometry against your existing electrode before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off gas and disconnect power to the furnace; verify zero voltage with a multimeter before working near the burners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment door to expose the burner assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the electrode position, gap, and the ignition wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the high-voltage lead, remove the mounting screw, and lift out the old electrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new electrode, confirm the spark gap is correct, and reconnect the ignition lead per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then watch a full ignition sequence to confirm a strong spark and steady flame.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace clicks repeatedly but the burners fail to light.\u003c\/li\u003e\n\u003cli\u003eIgnition lockout after several failed attempts (no flame proven).\u003c\/li\u003e\n\u003cli\u003eCracked ceramic insulator or eroded, corroded electrode tip.\u003c\/li\u003e\n\u003cli\u003eIntermittent heat — burners light some cycles and not others.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027327795571,"sku":"1179966","price":37.64,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047612301683,"sku":"1179966-GEN","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1179966_59a37a22-6c80-4fc6-9738-b4b99f7d7554.jpg?v=1782891611","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-electrode-for-rgs210leea0aaaa-direct-spark-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}