{"product_id":"icp-gas-valve-support-bracket-for-rgs150seba0agaa-oem-1178238-ships-today","title":"ICP Gas Valve Support Bracket for RGS150SEBA0AGAA — OEM 1178238 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine OEM gas valve support bracket (part number 1178238) for the ICP \/ Tempstar \/ Heil RGS150SEBA0AGAA 150,000 BTU gas-fired unit. The bracket secures the gas valve to the burner assembly, holding it in correct alignment with the manifold and gas piping so the valve cannot vibrate, shift, or stress its inlet and outlet connections during operation. A factory-correct mount keeps the burner orifices and valve outlet properly spaced, which is essential for clean ignition and a stable flame. When the original bracket is corroded, cracked, or bent — often after a valve replacement or rough handling during service — the gas valve can sag, strain the union, and create the conditions for a gas leak. Replacing the bracket with the exact OEM part restores proper support and protects the new or existing valve.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1178238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eBracket, Support, Gas Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eMounting \/ Support Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGalvanized \/ coated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS150SEBA0AGAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the ICP \/ Tempstar \/ Heil RGS150SEBA0AGAA gas unit and shared platform models in the same RGS150 family. Always confirm your full model and serial number before ordering to guarantee correct fitment.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off the gas supply at the manual valve and disconnect electrical power. Verify zero voltage with a multimeter before touching any components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the gas valve, bracket position, and all wiring and tubing before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Disconnect the valve only as needed, remove the fasteners holding the old bracket, and lift out the damaged bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new 1178238 bracket in the same orientation, reattach the gas valve, and torque the gas connections to spec.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then leak-check every joint with soap solution and confirm a clean ignition and stable flame.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible rust, cracks, or bending in the existing bracket\u003c\/li\u003e\n\u003cli\u003eGas valve sagging or loose on the manifold\u003c\/li\u003e\n\u003cli\u003eAudible vibration or rattle from the valve during firing\u003c\/li\u003e\n\u003cli\u003eStrain or weeping at the valve inlet\/outlet connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027366625651,"sku":"1178238","price":41.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047599718771,"sku":"1178238-GEN","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-gas-valve-assembly-1178238_c610f7ba-0291-4a0c-a6ae-64b5cca45569.jpg?v=1782891388","url":"https:\/\/nationalhvacparts.com\/products\/icp-gas-valve-support-bracket-for-rgs150seba0agaa-oem-1178238-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}