{"product_id":"icp-furnace-control-board-kit-for-rgs210seca0aaaa-oem-replacement-ships-today","title":"ICP Furnace Control Board Kit for RGS210SECA0AAAA — OEM Replacement | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis is a genuine OEM furnace control board kit, ICP part number 1183618, for the ICP\/Tempstar\/Heil RGS210 gas furnace. The integrated furnace control board is the brain of the system — it manages the ignition sequence, runs the inducer and blower timings, monitors safety inputs such as limits and pressure switches, controls the gas valve, and stores diagnostic fault codes on its LED. As the kit, it ships with the board and the hardware needed for a clean swap. Control boards fail from power surges, heat-stressed relays, corroded connectors, and cracked solder joints. Symptoms include a completely dead furnace, no response to a thermostat call, the inducer or blower not sequencing, repeated lockouts, or an LED flashing a hard fault. A correct OEM board restores the factory ignition and blower logic without field reprogramming.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1183618\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated Furnace Control Board Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctions\u003c\/td\u003e\n\u003ctd\u003eIgnition, blower \u0026amp; inducer timing, safety monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003eOn-board LED fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned for the ICP\/Tempstar\/Heil RGS210SECA0AAAA and related RGS210-series gas furnaces that specify the 1183618 control board kit. Confirm the board part number printed on your existing board before ordering, as control boards are model-specific.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the control-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every connector and wire on the old board before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug each harness, release the board standoffs or screws, and lift the old board out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new board, transfer any jumpers or settings, and reconnect every harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, initiate a heat call, and verify the full ignition and blower sequence with no fault codes.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace is completely dead or won't respond to the thermostat\u003c\/li\u003e\n\u003cli\u003eInducer or blower fails to sequence correctly\u003c\/li\u003e\n\u003cli\u003eRepeated lockouts with a hard-fault LED code\u003c\/li\u003e\n\u003cli\u003eVisible burnt relays, corrosion, or scorching on the board\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027325731187,"sku":"1183618","price":240.5,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047561806195,"sku":"1183618-GEN","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1183618_ec17ef69-7cce-443b-a74f-4cc975528345.jpg?v=1782889352","url":"https:\/\/nationalhvacparts.com\/products\/icp-furnace-control-board-kit-for-rgs210seca0aaaa-oem-replacement-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}