{"product_id":"icp-furnace-control-board-kit-for-rgs210ltea0aaaa-oem-ships-today","title":"ICP Furnace Control Board Kit for RGS210LTEA0AAAA — OEM | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM control board kit (part 1183618) is the integrated furnace control (IFC) for the ICP\/Tempstar\/Heil RGS210LTEA0AAAA gas furnace. The board is the brain of the furnace: it manages the ignition sequence, sequences the inducer and blower motors, monitors safety limits and the flame sensor, and times every stage of the heating and cooling cycle. The kit ships with the mounting hardware needed for a complete replacement.\u003c\/p\u003e\n\u003cp\u003eControl boards fail from power surges, heat stress, corrosion, and burned relays or traces. Symptoms of a failed board include a completely dead furnace, no inducer or blower operation, ignition that never starts, error codes flashing on the diagnostic LED, or short-cycling. A visibly burned relay, scorched trace, or blown fuse on the board confirms replacement is needed.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1183618\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated Furnace Control Board Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIgnition, blower\/inducer sequencing, safety monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil \/ Comfortmaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS210LTEA0AAAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis control board kit is the OEM-specified replacement for the ICP-family RGS210LTEA0AAAA gas furnace and related Tempstar, Heil, Comfortmaker, and Arcoaire RGS210 units that use part 1183618. Match the board's part number and connector layout to your existing control before ordering, as IFC boards vary by model series.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker and shut off the gas. Verify zero voltage at the board with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the control\/blower compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every connector and wire harness on the board before unplugging anything; note plug positions and colors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug each harness, remove the mounting screws, and lift out the old board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new board with the included hardware and reconnect each harness to its matching plug per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a full heat call, and confirm correct inducer start, ignition, blower timing, and a clean diagnostic LED with no fault codes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace completely dead — no inducer, blower, or ignition response\u003c\/li\u003e\n\u003cli\u003eDiagnostic LED flashing a hard fault or board-failure code\u003c\/li\u003e\n\u003cli\u003eShort-cycling or erratic, out-of-sequence operation\u003c\/li\u003e\n\u003cli\u003eVisibly burned relay, scorched trace, or blown onboard fuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027326255475,"sku":"1183618","price":214.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047561511283,"sku":"1183618-GEN","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1183618_cec317b6-8c7e-4065-a5c1-4d763f0caa85.jpg?v=1782889338","url":"https:\/\/nationalhvacparts.com\/products\/icp-furnace-control-board-kit-for-rgs210ltea0aaaa-oem-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}