{"product_id":"icp-furnace-control-board-kit-for-rgs210leea0aaaa-oem-replacement-ships-today","title":"ICP Furnace Control Board Kit for RGS210LEEA0AAAA — OEM Replacement | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM control board kit (Part No. 1183618) for the ICP \/ Tempstar \/ Heil RGS210LEEA0AAAA. The integrated furnace control board is the brain of the system — it sequences ignition, monitors the flame sensor and safety limits, controls the inducer and blower motors, and manages the 24-volt signals to and from the thermostat. The kit includes the board and the hardware needed for a complete swap. Control boards typically fail from voltage surges, overheating, corroded relays, or cracked solder joints, producing symptoms that range from a completely dead furnace to erratic blower operation and repeated lockouts. Replacing the board with the correct OEM kit restores proper ignition sequencing and safety control.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1183618\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated Furnace Control Board Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIgnition, blower, inducer \u0026amp; safety sequencing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eSupplied as the factory replacement kit for the ICP RGS210LEEA0AAAA furnace. It also fits compatible Tempstar, Heil, and Comfortmaker furnaces that specify the 1183618 control board kit. Match the OEM part number and connector layout to your existing board before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter before touching the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace control-compartment panel to expose the existing board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every wire harness and plug location before disconnecting — connector positions are critical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug all harnesses, remove the mounting screws or standoffs, and lift out the old board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new board from the kit and reconnect each harness exactly per your photos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, set the thermostat to heat, and verify a full ignition, flame-proving, and blower sequence.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace is completely dead with no response to a heat call.\u003c\/li\u003e\n\u003cli\u003eRepeated lockouts or rapid blinking diagnostic LED error codes.\u003c\/li\u003e\n\u003cli\u003eBlower or inducer runs continuously or won't start.\u003c\/li\u003e\n\u003cli\u003eVisible burnt spots, scorched relays, or a burnt-electronics smell on the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027327828339,"sku":"1183618","price":219.64,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047561150835,"sku":"1183618-GEN","price":168.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1183618_bd2a2f38-875d-4759-937b-3c1015631798.jpg?v=1782889324","url":"https:\/\/nationalhvacparts.com\/products\/icp-furnace-control-board-kit-for-rgs210leea0aaaa-oem-replacement-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}