{"product_id":"icp-furnace-control-board-kit-for-rgs102hfca0aaa-oem-1183618-ships-today","title":"ICP Furnace Control Board Kit for RGS102HFCA0AAA — OEM 1183618 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe OEM Control Board Kit (Part No. 1183618) is the integrated furnace control (IFC) — the brain of your ICP\/Tempstar\/Heil RGS102HFCA0AAA gas furnace. It manages the entire heating sequence: it reads the thermostat call, runs the inducer and pressure-switch proving, energizes the hot surface igniter, opens the gas valve, monitors flame via the sensor, and times the blower on and off delays. It also handles safety lockouts and flashes diagnostic fault codes via an onboard LED. A failed control board produces some of the most frustrating furnace symptoms — no response to the thermostat, blower running constantly, ignition that never starts, or intermittent lockouts. This genuine kit includes the board and the mounting hardware needed for a direct factory-spec replacement.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1183618\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated Furnace Control Board Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIgnition sequencing, blower timing, safety, diagnostics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eControl board + mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM exact replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered for the ICP, Tempstar, and Heil RGS102HFCA0AAA gas furnace and related RGS-series models that use this integrated furnace control. Verify your model and serial number before ordering, and compare the board's connector layout and part number to your existing control to confirm exact fitment.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect electrical power and shut off the gas. Verify zero voltage with a multimeter before touching the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace control\/blower compartment panel to expose the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every wire harness and plug connection before unplugging anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug all connectors, remove the mounting screws, and lift out the old control board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new board with the included hardware and reconnect each harness to the matching plug per your photos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and gas, run a full heat cycle, and confirm proper ignition, blower timing, and no fault codes on the diagnostic LED.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace does not respond to the thermostat at all.\u003c\/li\u003e\n\u003cli\u003eBlower runs continuously or never starts.\u003c\/li\u003e\n\u003cli\u003eNo ignition sequence despite good igniter, valve, and pressure switch.\u003c\/li\u003e\n\u003cli\u003eDiagnostic LED dark, or flashing erratic\/control-fault codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027643253107,"sku":"1183618","price":246.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047544045939,"sku":"1183618-GEN","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1183618_f7162d6a-5c7b-48fb-b06b-ca2fef114d27.jpg?v=1782888782","url":"https:\/\/nationalhvacparts.com\/products\/icp-furnace-control-board-kit-for-rgs102hfca0aaa-oem-1183618-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}