{"product_id":"icp-ecm-x-13-motor-control-for-wja342000ktp0b1-1-2-hp-ships-today-1","title":"ICP ECM X-13 Motor Control for WJA342000KTP0B1 — 1\/2 HP | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the OEM ECM X-13 motor control module for the ICP \/ Tempstar \/ Heil \u003cstrong\u003eWJA342000KTP0B1\u003c\/strong\u003e, OEM part number \u003cstrong\u003e1185846\u003c\/strong\u003e (ECM X-13 MTR CONTROL 1\/2 HP). The X-13 is a constant-torque electronically commutated motor (ECM) control rated at 1\/2 HP that drives the indoor blower at programmed speed taps. It is far more efficient than a legacy PSC motor and holds airflow steady against changing static pressure. The control module is the electronics end of the ECM assembly — when it fails the blower runs erratically, sticks on one speed, or stops entirely, producing weak airflow, no-heat \/ no-cool comfort complaints, or blower-fault codes at the furnace control board.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1185846\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eECM X-13 Constant-Torque Motor Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorsepower\u003c\/td\u003e\n\u003ctd\u003e1\/2 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eIndoor blower \/ air handler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM replacement for the ICP \/ Tempstar \/ Heil model \u003cstrong\u003eWJA342000KTP0B1\u003c\/strong\u003e. The 1\/2 HP ECM X-13 control is used across numerous ICP-family furnaces and air handlers built on the X-13 blower platform. Confirm horsepower, the X-13 designation, and the speed-tap configuration against your existing module before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter before touching the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the blower-compartment service panel and slide out the blower assembly if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the high-voltage harness and the low-voltage speed-tap plug positions before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the power and control connectors, then separate the failed control module from the motor end shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Fit the new X-13 control to the motor, reconnect the power harness and speed-tap plug exactly per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and confirm the blower ramps to the correct speed on a heat and cool call.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlower runs intermittently, surges, or will not start.\u003c\/li\u003e\n\u003cli\u003eWeak or no airflow despite a clean filter and open registers.\u003c\/li\u003e\n\u003cli\u003eBlower stuck on a single speed regardless of heat\/cool demand.\u003c\/li\u003e\n\u003cli\u003eFurnace control board reporting a blower or motor fault code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027233161587,"sku":"1185846","price":245.7,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047520354675,"sku":"1185846-GEN","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-blower-motor-ecm-1185846_5fa3c730-af9e-45bf-a84d-0be46db0cc6f.jpg?v=1782887895","url":"https:\/\/nationalhvacparts.com\/products\/icp-ecm-x-13-motor-control-for-wja342000ktp0b1-1-2-hp-ships-today-1","provider":"National HVAC Parts","version":"1.0","type":"link"}