{"product_id":"icp-control-board-kit-for-rgs102stca0aaa-oem-furnace-ignition-board-1183618-ships-today","title":"ICP Control Board Kit for RGS102STCA0AAA — OEM Furnace Ignition Board 1183618 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM control board kit (part number 1183618) is the integrated furnace control (IFC) module for the ICP \/ Tempstar \/ Heil RGS102STCA0AAA gas furnace. The control board is the brain of the furnace — it sequences the ignition cycle, monitors safety limits and flame signal, controls the inducer and blower motors, and manages the 24V control circuit. When this board fails, the furnace may fail to ignite, short-cycle, lock out, run the blower continuously, or stop responding to the thermostat entirely. Supplied as a complete kit with the correct mounting and connector hardware for a direct OEM replacement.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1183618\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eIntegrated Furnace Control Board Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRGS102STCA0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as the factory control board for the ICP \/ Tempstar \/ Heil RGS102STCA0AAA gas furnace and shared chassis variants across the ICP family (Comfortmaker, Arcoaire, KeepRite). Always confirm the part number printed on your existing board matches 1183618 before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then verify zero voltage at the board with a multimeter before touching any connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace blower-compartment service panel to expose the control board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every wire harness and terminal connection on the existing board before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the molex\/spade connectors, remove the board mounting screws or standoffs, and lift out the failed board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new board, transfer connectors one at a time to match your photos, and seat each harness fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for heat, and verify the full ignition sequence: inducer, igniter, gas valve, flame proof, and blower.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace will not start or has no response from the thermostat\u003c\/li\u003e\n\u003cli\u003eBlower runs continuously or fails to start during a heat call\u003c\/li\u003e\n\u003cli\u003eRepeated lockouts or fault\/diagnostic LED flash codes\u003c\/li\u003e\n\u003cli\u003eVisible burnt traces, scorched relays, or a melted connector on the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027614744947,"sku":"1183618","price":246.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047471792499,"sku":"1183618-GEN","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-1183618_c32deb12-ec34-44d9-9487-e64ed267312e.jpg?v=1782885634","url":"https:\/\/nationalhvacparts.com\/products\/icp-control-board-kit-for-rgs102stca0aaa-oem-furnace-ignition-board-1183618-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}