{"product_id":"icp-2-pole-contactor-30a-40a-24v-for-rgs091hdbb0aaaa-oem-replacement-ships-today","title":"ICP 2-Pole Contactor 30A\/40A 24V for RGS091HDBB0AAAA — OEM Replacement | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM 2-pole contactor for the ICP Tempstar Heil RGS091HDBB0AAAA system is available in 30-amp (part 1178074) and 40-amp (part 1178211) ratings, both with a 24-volt control coil. The contactor is the electromechanical switch that energizes the compressor and condenser fan motor when the 24V control signal closes the coil, pulling the two power poles together to pass line voltage to the load. Over time the contact points pit, burn, and weld from arcing, and the coil can fail open, leaving the unit unable to start or unable to shut off. A 2-pole design switches both legs of the 240V supply for clean make-and-break operation. Choose the amp rating that matches your original contactor.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (30A)\u003c\/td\u003e\n\u003ctd\u003e1178074\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (40A)\u003c\/td\u003e\n\u003ctd\u003e1178211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2-Pole Definite Purpose Contactor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e30A \/ 40A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eRGS091HDBB0AAAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits the ICP Tempstar Heil RGS091HDBB0AAAA and related systems using a 2-pole, 24V-coil definite purpose contactor. Match the amp rating (30A or 40A) and terminal layout to your original part.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the breaker and disconnect, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the unit's electrical access panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph all line, load, and 24V coil wires before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Transfer wires one at a time or label them, then unbolt the old contactor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor, reconnect each wire to the matching terminal per your photo, and confirm the coil leads land on the 24V terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for cooling, and verify the contactor pulls in and the compressor\/fan energize.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuzzing or chattering contactor that won't pull in cleanly\u003c\/li\u003e\n\u003cli\u003ePitted, burned, or welded contact points\u003c\/li\u003e\n\u003cli\u003eCompressor\/fan won't start or won't shut off\u003c\/li\u003e\n\u003cli\u003eOpen or burned 24V coil reading on a multimeter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"Direct Replacement","offer_id":63027680313715,"sku":"1178074-GEN","price":32.95,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63047935754611,"sku":"1178074","price":42.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-2pole-1178074_c9c8cdb1-0bfc-4868-9b12-9133d01caefa.jpg?v=1782881427","url":"https:\/\/nationalhvacparts.com\/products\/icp-2-pole-contactor-30a-40a-24v-for-rgs091hdbb0aaaa-oem-replacement-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}