{"product_id":"icp-2-pole-40a-24v-contactor-for-rgs091htcb0aaa-oem-definite-purpose-ships-today","title":"ICP 2-Pole 40A 24V Contactor for RGS091HTCB0AAA — OEM Definite Purpose | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine ICP 2-pole, 40-amp definite-purpose contactor (part 1178211) with a 24-volt coil, used on the RGS091HTCB0AAA. A contactor is the electrically operated switch that closes the high-voltage circuit to the compressor and condenser fan motor whenever the 24V control circuit energizes the coil. When the thermostat calls for cooling, the low-voltage coil pulls the contacts closed, sending line power to the load. Over time the silver contacts pit, burn, and weld from the constant arcing of inrush current, while the coil can hum, chatter, or fail open. A failing contactor causes hard starts, buzzing, intermittent operation, or a system that will not run at all. This 40A 24V unit is a direct OEM replacement rated for reliable, repeatable switching.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1178211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDefinite Purpose Contactor, 2-Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Heil \/ Tempstar \/ Comfortmaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e40 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eGenuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBuilt for the ICP\/Tempstar\/Heil RGS091HTCB0AAA and other ICP-family systems that use a 2-pole 40A definite-purpose contactor with a 24V coil. Verify pole count, amp rating, and coil voltage against your existing contactor before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter on both line terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the electrical-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every wire and terminal position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Label and remove the line, load, and 24V coil wires, then unbolt the old contactor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor and reconnect each wire to the matching terminal per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for cooling, and confirm the contacts pull in cleanly with no chatter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoud buzzing, humming, or chattering from the contactor\u003c\/li\u003e\n\u003cli\u003ePitted, burned, or welded contacts visible on inspection\u003c\/li\u003e\n\u003cli\u003eSystem fails to start or runs intermittently on a cooling call\u003c\/li\u003e\n\u003cli\u003eCoil does not pull the contacts in when energized with 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"Direct Replacement","offer_id":63027676709235,"sku":"1178211-GEN","price":29.95,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63047931887987,"sku":"1178211","price":38.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-2pole-1178211_d0f0d2a3-4c99-4401-a0f2-8d1ccfc8372a.jpg?v=1782881259","url":"https:\/\/nationalhvacparts.com\/products\/icp-2-pole-40a-24v-contactor-for-rgs091htcb0aaa-oem-definite-purpose-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}