{"product_id":"icp-1-pole-30a-contactor-for-wpg3304060lkc1-24v-coil-w-shunt-ships-today","title":"ICP 1-Pole 30A Contactor for WPG3304060LKC1 — 24V Coil w\/ Shunt | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine ICP 1-pole 30A definite-purpose contactor with shunt (OEM 1172472) is the electrically controlled switch that powers the compressor and condenser fan on your ICP \/ Tempstar \/ Heil WPG3304060LKC1 package gas-electric unit. When the thermostat calls for cooling, 24V is applied to the contactor coil, the armature pulls in, and line voltage passes through the contacts to start the compressor. The built-in shunt maintains a continuous neutral\/line path so the circuit stays complete on this single-pole design. Over thousands of cycles the contacts pit, burn, and weld, and the coil can fail open. Symptoms include a unit that hums but won't start, contacts that chatter or buzz, a compressor that won't shut off because the points are welded closed, or no cooling at all when the coil is dead. Replacing a worn contactor restores reliable, quiet switching.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1172472\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDefinite-Purpose Contactor, 1-Pole with Shunt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e30 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM replacement for the ICP \/ Tempstar \/ Heil WPG3304060LKC1 package gas-electric unit and related WPG-series models using the 1172472 single-pole 30A 24V contactor. Verify pole count, amp rating, and 24V coil against your existing contactor before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the unit disconnect and verify zero voltage with a multimeter on all line terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the electrical\/control service panel to reach the contactor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph all line, load, and 24V coil wires before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Transfer wires one at a time or label them, then unbolt the old contactor from its bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor and reconnect each wire to the matching terminal per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor starts without chatter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnit hums or buzzes but the compressor won't start\u003c\/li\u003e\n\u003cli\u003eContactor chatters or pulls in intermittently\u003c\/li\u003e\n\u003cli\u003eCompressor runs nonstop from welded-closed contacts\u003c\/li\u003e\n\u003cli\u003eBurned, pitted contacts or an open 24V coil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021532807539,"sku":"1172472","price":36.34,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047228031347,"sku":"1172472-GEN","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-1pole-1172472_0aec3c77-cbac-4234-8879-d3df7250486d.jpg?v=1782878199","url":"https:\/\/nationalhvacparts.com\/products\/icp-1-pole-30a-contactor-for-wpg3304060lkc1-24v-coil-w-shunt-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}