{"product_id":"icp-1-pole-25a-contactor-for-yj030g1-24v-coil-ships-today","title":"ICP 1-Pole 25A Contactor for YJ030G1 — 24V Coil | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM single-pole definite-purpose contactor (part number 1050699) for the ICP\/Tempstar\/Heil YJ030G1 condensing unit. The contactor is the electrically controlled switch that energizes the compressor and outdoor fan motor whenever the thermostat calls for cooling or heating. When the 24V control signal reaches the coil, the magnetic field pulls the contacts closed and sends 240V line power to the compressor. Rated for 25 amps with a 24-volt coil and a single pole, it is the exact switching device this unit was built around.\u003c\/p\u003e\n\u003cp\u003eContactors fail more often than almost any other outdoor component because the contacts arc and pit every time they open and close. Common failure symptoms include a humming or chattering outdoor unit, a compressor that will not start, welded contacts that leave the unit running constantly, or visible burning and pitting on the contact surfaces. Replacing a worn contactor restores clean, reliable switching and protects the compressor from low-voltage and chatter damage.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1050699\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDefinite-purpose contactor, 1-pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd\u003e25 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned as the OEM replacement for the ICP\/Tempstar\/Heil YJ030G1 model. Single-pole 24V\/25A contactors are widely used across ICP-family condensing units and heat pumps; always confirm the amp rating, pole count, and coil voltage match your existing part before installing.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the condensing unit's electrical access panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph all wiring connections before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Note line, load, and coil terminal positions, transfer wires one at a time, and unscrew the old contactor from its bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor and reconnect each wire to the matching terminal per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and confirm the contactor pulls in on a thermostat call and the compressor and fan start.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoud humming, buzzing, or chattering from the outdoor unit\u003c\/li\u003e\n\u003cli\u003eCompressor and condenser fan will not start on a cooling call\u003c\/li\u003e\n\u003cli\u003eUnit runs continuously due to welded\/stuck contacts\u003c\/li\u003e\n\u003cli\u003eVisible pitting, burning, or melted plastic on the contactor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021442564467,"sku":"1050699","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047213482355,"sku":"1050699-GEN","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-1pole-1050699_76676062-a965-4a9a-9b1b-d49b7194cc81.jpg?v=1782877557","url":"https:\/\/nationalhvacparts.com\/products\/icp-1-pole-25a-contactor-for-yj030g1-24v-coil-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}