{"title":"Ignition","description":null,"products":[{"product_id":"carrier-py4gpab60130na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB60130NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB60130NA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor (part # 48VL400002, superseded by 50HJ403022) is the factory-authorized ignition replacement for the \u003cstrong\u003eCarrier PY4GPAB60130NA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode generates the high-voltage arc that ignites the burner assembly at the start of each heating cycle. When it fails, the control board will attempt ignition, detect no flame signal, and lock out — leaving the unit in a no-heat fault condition. Symptoms include repeated ignition clicking with no burner light-off, followed by a hard lockout fault code.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode ignitor assembly | Factory-matched geometry and electrode gap | CSA listed | Dimensions approx. 3.25\" H × 1.5\" W | Country of Origin: Mexico\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a Factory Authorized Part (FAP), meaning it meets exact Carrier electrode gap and ceramic insulator specifications. Off-brand electrodes frequently have inconsistent gap tolerances, leading to weak or unreliable spark arcs and repeat lockout faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 24V control power before servicing. Tools needed: 1\/4\" hex driver, needle-nose pliers, and a spark gap gauge. Photograph existing electrode positioning and wiring harness routing before removal. Recheck electrode gap to factory spec after installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty. Ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the \u003cstrong\u003eCarrier PY4GPAB60130NA\u003c\/strong\u003e packaged rooftop\/gas-electric unit. Note: OEM part 48VL400002 is superseded by Carrier part # 50HJ403022 — both are valid factory replacements for this model. Confirm your unit's existing electrode assembly dimensions against the specs above before ordering. Our fitment team is available to verify compatibility prior to purchase. \u003cstrong\u003eIn stock — order now and ships today!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640304587123,"sku":"CARRIE-PY4GPAB60130NA-IGNITER-48VL400002","price":71.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640304619891,"sku":"CARRIE-PY4GPAB60130NA-IGNITER-48VL400002-GEN","price":63.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_afdcb03d-2a4a-4cfc-b255-f70f442f432f.jpg?v=1775040390"},{"product_id":"carrier-py4gpab60115na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB60115NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB60115NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the glowing element that lights the gas burners in your Carrier PY4GPAB60115NA furnace. On each heat call, the control board sends 120V to the igniter, which glows white-hot in seconds; once it reaches temperature, the gas valve opens and the burners ignite off the element. When an igniter fails, the furnace blows cold air or no air, you hear the inducer and a click but never the whoosh of ignition, and the board often locks out after several failed tries. Hairline cracks in the element — sometimes invisible — are the most common failure, and a dropped or oil-contaminated igniter can shatter on the first cycle.\n\nThis OEM igniter is supplied in the material spec'd for the PY4GPAB60115NA. Carrier furnaces of this generation commonly use a silicon carbide element with a cold resistance in the roughly 40–75 ohm range (verify with a multimeter against your old part), though some revisions use a more durable silicon nitride element. Matching the resistance and mounting bracket is essential so the element glows hot enough to ignite reliably.\n\nOEM matters because a generic igniter with the wrong resistance either won't reach ignition temperature — causing no-heat lockouts — or runs hotter than designed and burns out in a single season. Cheap silicon carbide elements are also far more brittle.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver and a multimeter to verify resistance before and after. NEVER touch the element with bare fingers — skin oil creates hot spots that crack it. #1 safety warning: SHUT OFF THE GAS and KILL THE BREAKER before servicing the burner compartment.\n\nShips same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB60115NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640304783731,"sku":"CARRIE-PY4GPAB60115NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640304816499,"sku":"CARRIE-PY4GPAB60115NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_787c5099-a542-4f67-85ee-def016adc826.jpg?v=1775035378"},{"product_id":"carrier-py4gpab60115aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB60115AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB60115AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the small ceramic element that ignites the gas burners in your Carrier PY4GPAB60115AA furnace. When the thermostat calls for heat, the control board applies 120V to the igniter, which glows white-hot within a few seconds; once it's at temperature, the gas valve opens and the burners light directly off the glowing tip. A failed igniter leaves you with cold air from the registers, the inducer running and an audible click with no ignition, and a control board that locks out after several retries. The most common failure is a fine crack in the element — often impossible to see — frequently caused by age or by oil contamination from bare-hand handling.\n\nThis OEM igniter matches the material and electrical spec for the PY4GPAB60115AA. These Carrier furnaces typically use a silicon carbide element with a cold resistance roughly in the 40–75 ohm range (confirm against your old part with a multimeter); some later revisions use tougher silicon nitride. Correct resistance and the right mounting bracket ensure the element reaches full ignition temperature reliably.\n\nOEM matters because a generic igniter with mismatched resistance either fails to glow hot enough — producing no-heat lockouts — or overdrives and burns out within a season. Lower-grade silicon carbide is also significantly more fragile and prone to cracking.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver and a multimeter to verify resistance. Handle the element only by its ceramic base or bracket — never touch the glow tip, as skin oils create hot spots that crack it. #1 safety warning: SHUT OFF THE GAS and KILL THE BREAKER before opening the burner compartment.\n\nShips same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB60115AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640305013107,"sku":"CARRIE-PY4GPAB60115AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640305045875,"sku":"CARRIE-PY4GPAB60115AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_a18b49c3-9145-4be3-9c97-7ac507bbfbef.jpg?v=1775035375"},{"product_id":"carrier-py4gpab60090na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor for PY4GPAB60090NA — 48VL400002","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor for Model PY4GPAB60090NA (48VL400002 \/ 50HJ403022)\u003c\/h1\u003e\u003cp\u003eThis is the factory-authorized OEM spark electrode ignitor assembly for the \u003cstrong\u003eCarrier PY4GPAB60090NA\u003c\/strong\u003e packaged gas unit. The spark electrode is the first component in the ignition sequence — it generates the high-voltage spark that lights the burner. When this part fails or cracks, the control board will attempt ignition, detect no flame, and trigger a safety lockout. Common symptoms include: no heat, repeated ignition attempts followed by a fault code, or a furnace that cycles on and off without ever establishing a flame.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | Superseded by 50HJ403022 — both are factory-authorized Carrier parts. This listing ships the current production version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode style — L-shaped | Total length: 2¾\" | Country of origin: USA | Factory-matched gap and ceramic insulator for reliable arc generation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM electrodes maintain exact gap geometry and ceramic grade specified by Carrier engineering. Off-brand electrodes often use inferior ceramics that crack under thermal cycling, causing repeat no-heat calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Shut off gas and power before starting. Tools needed: 1\/4\" nut driver, needle-nose pliers, phone camera (photograph wire connections before removal). Handle the ceramic tip carefully — do not touch with bare hands. Reconnect ignition wire and ground lead securely before restoring power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. In stock — ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as the direct OEM replacement for the \u003cstrong\u003eCarrier PY4GPAB60090NA\u003c\/strong\u003e packaged gas unit. Cross-references: 48VL400002, 50HJ403022, 50HJ401430, 50HJ400608. Verify your existing part number against your unit's data plate before ordering. Need fitment confirmation? Our HVAC parts team is standing by to verify compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640305209715,"sku":"CARRIE-PY4GPAB60090NA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640305242483,"sku":"CARRIE-PY4GPAB60090NA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_d90a3f5a-0cb8-48bd-a1a1-2863df021c54.jpg?v=1775040640"},{"product_id":"carrier-py4gpab60090aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB60090AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB60090AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the glowing ceramic element responsible for lighting the gas burners in your Carrier PY4GPAB60090AA furnace. Each time the thermostat calls for heat, the control board energizes the igniter with 120V; it glows white-hot in seconds, and once it reaches ignition temperature the gas valve opens and the burners light off the element. When the igniter fails, you'll feel cold air or none at all from the vents, hear the inducer and the valve click without any burner whoosh, and the control board will lock out after a few failed attempts. A nearly invisible crack in the element is the usual cause — often the result of normal aging or oil contamination from bare-handed handling.\n\nThis OEM igniter is matched to the material and electrical spec of the PY4GPAB60090AA. These Carrier furnaces generally use a silicon carbide element with a cold resistance in roughly the 40–75 ohm range (verify against your existing igniter with a multimeter); certain revisions upgrade to more durable silicon nitride. The correct resistance and mounting bracket guarantee the element gets hot enough to ignite the gas dependably.\n\nOEM matters because a generic igniter with the wrong resistance either won't glow hot enough — triggering no-heat lockouts — or runs too hot and burns out within a single heating season. Budget silicon carbide elements are also markedly more brittle and crack-prone.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver and a multimeter to check resistance. Handle the igniter only by its base — never touch the glow element, since skin oil leaves hot spots that crack it. #1 safety warning: SHUT OFF THE GAS and KILL THE BREAKER before working in the burner compartment.\n\nShips same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB60090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640305406323,"sku":"CARRIE-PY4GPAB60090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640305439091,"sku":"CARRIE-PY4GPAB60090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_49b53257-0eb0-47c0-aa87-44091d60e61d.jpg?v=1775035372"},{"product_id":"carrier-py4gpab48130na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB48130NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB48130NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the small electrode that glows orange to light the burners every time your Carrier PY4GPAB48130NA calls for heat. It's the most failure-prone part in a gas furnace because it's heated to over 2,000°F on every cycle. When it cracks or weakens you'll get no heat: the inducer runs, you hear the gas valve click, but the burners never light, and the board locks out after three or four failed tries. A homeowner often notices the furnace 'trying' and then going silent, or a faint click-click followed by cold air.\n\nThis OEM igniter uses a robust silicon nitride element rather than the brittle legacy silicon carbide style — far more resistant to thermal shock and cracking, with a typical cold resistance in the 40–75 ohm range that draws the correct current to glow hot enough for reliable burner ignition. The mounting bracket and connector are factory-matched to seat correctly in the PY4GPAB burner assembly.\n\nWhy OEM matters: generic igniters often ship with mismatched resistance or thinner elements that won't reach ignition temperature, causing repeated lockouts, or that burn out within a season. An igniter glowing dull instead of bright orange is the classic symptom of an under-spec aftermarket part.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver, Phillips screwdriver, and gloves — never touch the new element with bare fingers; skin oil creates hot spots that shorten its life. #1 safety warning: TURN OFF THE GAS and kill the furnace breaker before removing the igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB48130NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640305701235,"sku":"CARRIE-PY4GPAB48130NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640305734003,"sku":"CARRIE-PY4GPAB48130NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_dad3b108-4e20-4d20-86ba-79c680b70591.jpg?v=1775035370"},{"product_id":"carrier-py4gpab48115na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor Assembly for PY4GPAB48115NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor Assembly (48VL400002 \/ 50HJ403022) for Model PY4GPAB48115NA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor assembly is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAB48115NA\u003c\/strong\u003e packaged gas unit. The ignitor assembly generates the high-voltage spark that ignites the gas burner at the start of every heat cycle. When it fails, the control board will attempt ignition, fail to detect flame, and lock out the system — leaving you with no heat and a blinking fault code. Note: OEM part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e has been superseded by the current production part \u003cstrong\u003e50HJ403022\u003c\/strong\u003e; both part numbers are fulfilled by the same factory-replacement assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e 2-rod spark electrode design with mounting bracket | Ceramic-insulated electrode body rated for high-temperature operation | Approx. dimensions: 4.25″ L × 2.95″ W × 1.75″ H | Replaces: 48VL400002, 50HJ401430, 50HJ400608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine OEM Carrier ignitor assembly built to exact factory electrode gap and ceramic grade specifications. Generic igniters frequently use inferior ceramic compounds that crack under thermal cycling, causing repeat no-heat calls within one season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and 24V control power before beginning. Tools needed: 1\/4″ nut driver, needle-nose pliers, and a flashlight. Photograph the existing electrode orientation and wire routing before removal. Do not touch the ceramic electrode body with bare hands — skin oils cause premature cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Orders placed before cutoff ship same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Carrier model \u003cstrong\u003ePY4GPAB48115NA\u003c\/strong\u003e packaged gas\/electric rooftop unit. Cross-references include OEM part numbers 48VL400002 (discontinued) and current superseding part 50HJ403022. Always verify your unit's data plate and existing part number before ordering. Our fitment team is available to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640305897843,"sku":"CARRIE-PY4GPAB48115NA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640305930611,"sku":"CARRIE-PY4GPAB48115NA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_7246df35-2b33-4d27-b7eb-03cb4aa99b1e.jpg?v=1775040593"},{"product_id":"carrier-py4gpab60130aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB60130AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB60130AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAB60130AA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor generates the high-voltage spark that ignites the gas burner on every call for heat. When it fails, the control board will attempt ignition, detect no flame, and lock out — leaving you with a system that runs the inducer and clicks but never produces heat. Common symptoms include repeated ignition lockouts, error codes indicating failed ignition, or a unit that simply blows cold air.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM part 48VL400002 (superseded by current production part 50HJ403022) | Also replaces 50HJ401430 and 50HJ400608 — exact factory fit for Carrier PY4GPAB60130AA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine Factory Authorized Carrier part, manufactured to precise spark gap and electrode geometry specifications. Generic igniters often feature inconsistent spark gap tolerances, leading to unreliable ignition and premature failure, especially in packaged rooftop and split-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Disconnect power and shut off gas before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, and a multimeter for post-install verification. Photograph all wire routing and connector positions before removal. Handle electrode tip carefully — avoid contact with skin oils that can cause premature cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the Carrier \u003cstrong\u003ePY4GPAB60130AA\u003c\/strong\u003e packaged unit. Note that OEM part 48VL400002 has been superseded by current production part number 50HJ403022 — both are genuine Carrier parts and provide identical fit and function. Verify your unit's data plate and existing ignitor configuration before ordering. Our technical team is available to confirm fitment prior to purchase.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640306094451,"sku":"CARRIE-PY4GPAB60130AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640306127219,"sku":"CARRIE-PY4GPAB60130AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_3a8eb134-6b43-4e49-afc6-6dd2b630e9e6.jpg?v=1775040388"},{"product_id":"carrier-py4gpab48130aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB48130AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB48130AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter glows orange to light the burners each time your Carrier PY4GPAB48130AA calls for heat. Cycled to over 2,000°F on every start, it's the part most likely to fail in a gas furnace. When it cracks you'll have no heat — the inducer spins up, the gas valve clicks, but the burners never ignite and the control board locks out after three or four attempts. Homeowners typically describe a furnace that 'starts to run then quits,' or blows only cold air on a heat call.\n\nThis OEM igniter uses a durable silicon nitride element instead of the fragile older silicon carbide design, giving it far greater resistance to thermal-shock cracking. Its cold resistance falls in the correct 40–75 ohm window so it draws the right current to reach full ignition temperature, and the bracket and plug are factory-matched to the PY4GPAB48130AA burner assembly.\n\nWhy OEM matters: aftermarket igniters often have out-of-spec resistance or thinner filaments that glow dull rather than bright orange, never getting hot enough for clean ignition and triggering repeated lockouts — or they simply burn out within a heating season. Matching the OEM element keeps ignition reliable and protects the burner sequence.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver, Phillips screwdriver, and gloves — do not handle the new element bare-handed, as skin oils create hot spots that crack it prematurely. #1 safety warning: TURN OFF THE GAS supply and kill the furnace breaker before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB48130AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640306585971,"sku":"CARRIE-PY4GPAB48130AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640306618739,"sku":"CARRIE-PY4GPAB48130AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_84981fb0-35fc-4515-b602-2c392790b116.jpg?v=1775035367"},{"product_id":"carrier-py4gpab48115aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB48115AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor (48VL400002 \/ 50HJ403022) for Model PY4GPAB48115AA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAB48115AA\u003c\/strong\u003e packaged gas unit. The ignitor generates the high-voltage spark that ignites the gas burner on every call for heat. When this component fails, the control board will attempt ignition, detect no flame, and enter a safety lockout — leaving you with a blower running but no heat output. A failed ignitor is one of the most common causes of a no-heat service call on Carrier packaged rooftop and gas-electric units.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM part 48VL400002 (Spark Electrode Ignitor) | Current OEM successor: 50HJ403022 — direct factory replacement, same fit and function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e Factory OEM igniters are manufactured to exact electrode gap, ceramic insulator grade, and wire harness specifications. Off-brand substitutes frequently exhibit inconsistent spark timing and premature ceramic cracking, leading to repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and 120V power before starting. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph all wire connections before disconnecting. Avoid touching the ceramic electrode body with bare hands — skin oils accelerate cracking under heat cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the \u003cstrong\u003eCarrier PY4GPAB48115AA\u003c\/strong\u003e gas-electric packaged unit. Note that OEM part number 48VL400002 has been superseded by Carrier part 50HJ403022 — both numbers are fulfilled with the current production ignitor assembly. Verify your unit's model and data plate before ordering. Our fitment team is available to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640307274099,"sku":"CARRIE-PY4GPAB48115AA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640307306867,"sku":"CARRIE-PY4GPAB48115AA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_4a371f55-5af6-4a3b-b19c-ba0e9f3c7537.jpg?v=1775040385"},{"product_id":"carrier-py4gpab48090na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB48090NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor (48VL400002) for Model PY4GPAB48090NA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode ignitor assembly for the \u003cstrong\u003eCarrier PY4GPAB48090NA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor generates the high-voltage spark that ignites the gas burner at the start of every heat cycle. When it fails, the unit will attempt ignition, fail to establish flame, and enter a safety lockout — leaving you with no heat and a blinking fault code on the control board. The original part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e has been superseded by Carrier OEM replacement \u003cstrong\u003e50HJ403022\u003c\/strong\u003e, which ships as the current factory-authorized assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM 48VL400002 (superseded) | Current OEM replacement: 50HJ403022 | Spark electrode ignitor assembly | Factory-authorized Carrier part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM ignitor assemblies are precision-gapped and matched to the burner geometry of your Carrier unit. Generic spark electrodes often have inconsistent gap tolerances, leading to intermittent ignition failures and repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 24V control power before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph electrode position and wire routing before removal. Handle ceramic insulator carefully — do not touch the electrode tip with bare hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as the direct OEM replacement for Carrier model \u003cstrong\u003ePY4GPAB48090NA\u003c\/strong\u003e packaged units. Verify your existing part number (48VL400002) against your unit's data plate or wiring diagram before ordering. Not sure it fits? Our team verifies fitment before you order — contact us and we'll confirm compatibility fast.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640307470707,"sku":"CARRIE-PY4GPAB48090NA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640307503475,"sku":"CARRIE-PY4GPAB48090NA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_572a0d17-f41d-4557-8595-2e72008a65b8.jpg?v=1775040383"},{"product_id":"carrier-py4gpab48090aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAB48090AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAB48090AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter glows orange to light the burners every time your Carrier PY4GPAB48090AA calls for heat. Heated past 2,000°F on each cycle, it's the single most common failure point in a gas furnace. When it cracks you get no heat: the inducer runs, the gas valve clicks, but the burners never ignite and the control board locks out after a few failed attempts. Homeowners often notice the furnace 'starting then quitting' or pushing only cold air during a heat call.\n\nThis OEM igniter uses a tough silicon nitride element instead of the brittle older silicon carbide style, dramatically improving resistance to thermal-shock cracking. Its cold resistance sits in the correct 40–75 ohm range so it draws proper current and reaches full ignition temperature, and its bracket and connector are factory-matched to the PY4GPAB48090AA burner assembly.\n\nWhy OEM matters: aftermarket igniters often have wrong resistance values or thinner filaments that glow dull rather than bright orange, never getting hot enough for reliable ignition and causing repeated lockouts — or they fail within a single heating season. The correct OEM element keeps startup reliable and the burner sequence on spec.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver, Phillips screwdriver, and gloves — never touch the new element bare-handed; skin oils create hot spots that crack it. #1 safety warning: TURN OFF THE GAS supply and kill the furnace breaker before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB48090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640307765619,"sku":"CARRIE-PY4GPAB48090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640307798387,"sku":"CARRIE-PY4GPAB48090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_ad1a8480-04ea-4b3f-8129-7b04b5678540.jpg?v=1775035365"},{"product_id":"carrier-py4gpab42090na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB42090NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB42090NA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode ignitor assembly for the \u003cstrong\u003eCarrier PY4GPAB42090NA\u003c\/strong\u003e packaged gas unit. The spark electrode ignitor generates the high-voltage arc that directly lights the burner on every call for heat. When the ignitor fails — due to a cracked electrode tip, carbon fouling, or a broken wire harness connection — the control board will attempt ignition, detect no flame, and lock out the system, leaving you with zero heat. Replacement with a genuine OEM part ensures exact electrode gap geometry and wire harness fit, restoring first-try ignition reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 (superseded by 50HJ403022) | Genuine Carrier Factory Authorized Part | Includes electrode rod and bracket assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM electrodes maintain factory-spec tip geometry and insulator grade. Off-brand electrodes frequently use inferior ceramics that crack under thermal cycling, causing repeat no-heat calls within one season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and 24V power before beginning. Tools needed: 1\/4\" nut driver, needle-nose pliers, and a flashlight. Disconnect the high-voltage wire, remove the mounting screw, swap the electrode, and reconnect. Always verify the electrode gap matches the original before firing. Do \u003cem\u003enot\u003c\/em\u003e touch the ceramic insulator with bare hands — skin oils degrade the ceramic and shorten service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the \u003cstrong\u003eCarrier PY4GPAB42090NA\u003c\/strong\u003e packaged gas\/electric unit. Note: OEM part number 48VL400002 has been superseded by Carrier part \u003cstrong\u003e50HJ403022\u003c\/strong\u003e — both are stocked and either ships as your direct replacement. Confirm your unit's data plate matches before ordering. Our fitment team is available to verify compatibility before you buy — contact us with your full model and serial number.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640308584819,"sku":"CARRIE-PY4GPAB42090NA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640308617587,"sku":"CARRIE-PY4GPAB42090NA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_4248a378-99f5-4749-9a59-6be7ec038a20.jpg?v=1775040380"},{"product_id":"carrier-py4gpab42090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor Assembly for PY4GPAB42090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor Assembly 48VL400002 for Model PY4GPAB42090AA\u003c\/h1\u003e\u003cp\u003eThis is the factory OEM spark electrode ignitor assembly for the \u003cstrong\u003eCarrier PY4GPAB42090AA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor is a critical combustion component — it generates the high-voltage spark that ignites the gas burner on every heating call. When this part fails, the unit will attempt ignition, fail to establish flame, and enter a safety lockout, leaving you with no heat. Symptoms include a system that clicks but won't light, repeated ignition attempts followed by fault codes, or a furnace that runs the inducer but never fires the burner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 (superseded by 50HJ403022) | Factory Authorized Carrier replacement | Spark electrode ignitor assembly with mounting bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This factory-authorized OEM ignitor is precision-matched to the electrode gap, ceramic insulator rating, and spark timing specifications of the \u003cstrong\u003ePY4GPAB42090AA\u003c\/strong\u003e. Generic igniters often have inconsistent electrode gaps or lower-grade ceramic bodies that crack under thermal cycling, causing repeat failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas and power at the disconnect before beginning. Tools needed: 1\/4\" and 5\/16\" nut driver, needle-nose pliers. Locate the ignitor on the burner assembly, disconnect the wire harness connector, remove the mounting screws, and reverse to install. Do not touch the ceramic electrode body with bare hands — skin oils cause premature cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before cutoff.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the Carrier \u003cstrong\u003ePY4GPAB42090AA\u003c\/strong\u003e packaged gas\/electric system. Note: OEM part 48VL400002 has been superseded by Carrier part number 50HJ403022 — both are stocked and either will restore proper ignition function. Confirm your unit's gas valve type and burner configuration against your data plate before ordering. Our fitment team is available to verify compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640308846963,"sku":"CARRIE-PY4GPAB42090AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640308879731,"sku":"CARRIE-PY4GPAB42090AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_96e9d500-ad7b-4db7-b3e0-987e21520077.jpg?v=1775040590"},{"product_id":"carrier-py4gpab42060na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB42060NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB42060NA\u003c\/h1\u003e\u003cp\u003eThis is the factory OEM spark electrode ignitor assembly (part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e) for the \u003cstrong\u003eCarrier PY4GPAB42060NA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode is the component responsible for generating the high-voltage spark that ignites the gas burner on every call for heat. When the electrode cracks, carbon-tracks, or its tip erodes, the control board will detect a failed ignition attempt and lock out the system — leaving you with a unit that attempts to start, then shuts down with no heat delivered. Replacing the ignitor with the correct OEM part restores reliable, single-spark ignition and eliminates nuisance lockout calls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 (Carrier Factory Authorized Parts) | Superseded\/cross-referenced to 50HJ403022 in current production — same fit and function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e The OEM electrode is manufactured to exact gap spacing and ceramic insulator specs for the PY4GPAB42060NA burner assembly. Generic electrodes often ship with incorrect gap settings or inferior ceramic insulators, leading to weak spark, misfires, and premature cracking under thermal cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Requires gas shut-off and line-voltage lockout\/tagout before beginning. Tools needed: ¼\" nut driver, needle-nose pliers, 7mm socket, multimeter (verify 24V ignition signal). Electrode tip is ceramic — handle only by the mounting bracket, never touch the tip or porcelain with bare hands (skin oils cause premature failure). Photograph wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for the \u003cstrong\u003eCarrier PY4GPAB42060NA\u003c\/strong\u003e packaged rooftop\/gas-electric unit. Always verify your unit's full model and serial number on the data plate before ordering — electrode assemblies are model-specific to burner tray geometry and wire harness length. Questions about fitment? Our HVAC parts specialists confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640309043571,"sku":"CARRIE-PY4GPAB42060NA-IGNITER-48VL400002","price":61.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640309076339,"sku":"CARRIE-PY4GPAB42060NA-IGNITER-48VL400002-GEN","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_5c153cd4-76ee-409a-b594-deef1c7a8257.jpg?v=1775040378"},{"product_id":"carrier-py4gpab42060aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter Replacement for PY4GPAB42060AA","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter Replacement for PY4GPAB42060AA\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is what lights the burners on your Carrier PY4GPAB42060AA. On each call for heat it draws current and glows white-hot — roughly 1,800 to 2,500 degrees F — to ignite the gas as the valve opens. Igniters are the single most common furnace failure: when this one cracks or wears out you get the inducer and the click of the gas valve but no flame, repeated ignition lockouts (three tries then a long pause), cold air from the registers, or a furnace that short-cycles while trying and failing to light.\n\nSpecs: this is a hot surface igniter built on a silicon carbide element — the fragile gray-black fork style. Cold resistance typically reads in the 40 to 90 ohm range on a multimeter; an open (infinite) reading means it has failed. Many premium replacements upgrade to silicon nitride, which resists thermal-shock cracking and lasts far longer. Confirm the mounting bracket and plug orientation match your original before installing.\n\nOEM vs Generic: igniters live or die on resistance and element quality. A generic igniter with the wrong resistance will not reach full glow temperature, causing delayed-ignition rollout puffs or repeated lockouts; cheap elements also crack after only a few hundred heating cycles. The OEM part matches the exact resistance and glow curve the control board expects.\n\nInstall — difficulty 2\/5. You will need a 1\/4-inch nut driver and clean gloves. Never touch the element with bare fingers — skin oils create hot spots that crack the carbide. Number-one safety warning: shut off both the gas supply and the furnace power before you reach into the burner compartment.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAB42060AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640309338483,"sku":"CARRIE-PY4GPAB42060AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640309371251,"sku":"CARRIE-PY4GPAB42060AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_ccdd3401-1a71-42a1-9f53-4f8be7db9986.jpg?v=1775035362"},{"product_id":"carrier-py4gpab36060na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB36060NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB36060NA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode ignitor for the \u003cstrong\u003eCarrier PY4GPAB36060NA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor generates the high-voltage spark that ignites the gas burner on each heating call. When this component fails, the control board detects a missed ignition event and places the unit in safety lockout — leaving you with no heat and a flashing fault code. Common failure symptoms include a clicking sound with no ignition, repeated lockout cycles, or a visibly cracked or fouled electrode tip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 | Current superseding part: \u003cstrong\u003e50HJ403022\u003c\/strong\u003e (factory-authorized direct replacement — same fit, form, and function)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e Factory OEM igniters are manufactured to exact gap spacing and ceramic insulator tolerances required by the Carrier PY4GPAB36060NA burner assembly. Off-brand electrodes risk inconsistent spark gap, premature ceramic cracking, and nuisance lockouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Disconnect power and shut off gas supply before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, and a multimeter to verify ignitor circuit continuity. Photograph existing wiring and electrode orientation before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse — order by 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the Carrier \u003cstrong\u003ePY4GPAB36060NA\u003c\/strong\u003e packaged gas\/electric unit. Note that OEM part 48VL400002 has been superseded by Carrier part 50HJ403022, which is the current factory-authorized replacement and ships in its place. Always verify your unit's data plate and existing ignitor configuration before ordering. Have fitment questions? Our HVAC parts specialists confirm compatibility before you buy — call or chat today.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640309666163,"sku":"CARRIE-PY4GPAB36060NA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640309698931,"sku":"CARRIE-PY4GPAB36060NA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_8d3e37b4-96f8-46e1-8735-60968fcb1537.jpg?v=1775040372"},{"product_id":"carrier-py4gpab36060aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter 48VL400002 for PY4GPAB36060AA","description":"\u003ch1\u003eOEM Carrier Hot Surface Igniter (48VL400002) for Model PY4GPAB36060AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode igniter is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAB36060AA\u003c\/strong\u003e packaged unit. The hot surface igniter is the first component in the ignition sequence — it heats to extreme temperature to ignite the gas burner on each call for heat. When it fails, the control board will attempt one or more ignition trials, detect no flame, and lock out the system, leaving you with a no-heat call and a flashing fault code. Replacing it with the correct OEM part (part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e) ensures the right wattage, geometry, and ceramic body rating for reliable, long-life ignition.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e OEM Part No. 48VL400002 | Spark Electrode \/ Hot Surface Igniter design | Factory-matched wattage and mounting geometry | Ceramic insulator body rated for high-cycle thermal stress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM igniters are manufactured to exact wattage and resistance tolerances. Off-brand igniters frequently run out of spec, causing nuisance lockouts or premature cracking of the igniter element — especially in high-efficiency packaged units like the PY4GPAB36060AA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and disconnect power before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, flat-blade screwdriver, needle-nose pliers. Handle the igniter element only by its ceramic body — skin oils accelerate element failure. Do not apply power until the unit is fully reassembled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as a direct OEM drop-in for \u003cstrong\u003eCarrier PY4GPAB36060AA\u003c\/strong\u003e packaged gas\/electric units. Always cross-reference the part number on your existing igniter and your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before every order — contact us and we'll confirm within minutes.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640309862771,"sku":"CARRIE-PY4GPAB36060AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640309895539,"sku":"CARRIE-PY4GPAB36060AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_8164a5e1-93eb-4d3b-8efb-d3f13d26fca3.jpg?v=1775033773"},{"product_id":"carrier-py4gpab36090na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAB36090NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB36090NA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor assembly is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAB36090NA\u003c\/strong\u003e packaged gas unit. The ignitor generates the high-voltage spark that ignites the gas burners on each call for heat. When this component fails, the unit will attempt ignition, fail to establish flame, and enter a safety lockout — leaving you with no heat and a blinking fault code. OEM part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e has been superseded by Carrier's current production part \u003cstrong\u003e50HJ403022\u003c\/strong\u003e, which is a direct, factory-authorized replacement shipped in its place.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode ignitor assembly | Superseded OEM P\/N: 48VL400002 | Current OEM P\/N: 50HJ403022 | Factory-authorized Carrier\/Bryant\/Payne replacement | Includes electrode and bracket assembly (wire harness sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine OEM Carrier ignitor, manufactured to exact factory spark-gap and ceramic insulator tolerances. Off-brand igniters may have inconsistent spark timing or substandard ceramic insulators that crack under thermal stress, leading to repeat failures and nuisance lockouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 24V control power before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph the original electrode orientation and wire routing before removal. Handle ceramic insulator with care — do not touch the electrode tip with bare hands, as skin oils can cause premature failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. Ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Carrier model \u003cstrong\u003ePY4GPAB36090NA\u003c\/strong\u003e packaged gas\/electric unit. Note: Original P\/N 48VL400002 is discontinued and fulfilled by superseding OEM P\/N 50HJ403022 — a direct factory-authorized drop-in replacement. Always verify your unit's model and serial data plate before ordering. Our team is available to confirm fitment prior to purchase.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640310616435,"sku":"CARRIE-PY4GPAB36090NA-IGNITER-48VL400002","price":55.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640310649203,"sku":"CARRIE-PY4GPAB36090NA-IGNITER-48VL400002-GEN","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_5f23e829-c739-4743-a07d-5a6068def9bb.jpg?v=1775040375"},{"product_id":"carrier-py4gpab36090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 — PY4GPAB36090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAB36090AA\u003c\/h1\u003e\u003cp\u003eThis is the factory-authorized OEM spark electrode ignitor (part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e) for the \u003cstrong\u003eCarrier PY4GPAB36090AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor generates the high-voltage arc that lights the burner on each call for heat. When this component fails, the control board will attempt ignition, detect no flame, and initiate a lockout sequence — leaving you with a no-heat condition and a fault code. Symptoms include repeated clicking with no ignition, or the unit cycling off within seconds of a heat call.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode ignitor assembly | Factory-matched electrode gap and ceramic insulator | OEM part number 48VL400002 | Superseded by Carrier part 50HJ403022 (same fit and function — confirm fitment at checkout)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM spark electrodes are manufactured to exact gap tolerances and ceramic insulation ratings specified by Carrier. Off-brand electrodes often suffer from inconsistent arc gaps, leading to unreliable ignition and premature ceramic cracking under thermal cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off all power and gas before servicing. Tools needed: 1\/4\" and 5\/16\" nut driver, needle-nose pliers. Disconnect the ignition wire lead, remove the mounting screws, swap the electrode, and reconnect. Always verify the electrode gap per the unit's service manual before firing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before 3 PM EST.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed as a direct OEM replacement for the \u003cstrong\u003eCarrier PY4GPAB36090AA\u003c\/strong\u003e packaged rooftop\/gas-electric unit. Note that OEM part 48VL400002 has been superseded by Carrier part number 50HJ403022 — our team will verify the correct current-production part ships for your unit. Questions about fitment? Contact our HVAC parts specialists before ordering — we confirm compatibility on every order.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640310813043,"sku":"CARRIE-PY4GPAB36090AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640310845811,"sku":"CARRIE-PY4GPAB36090AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_5004521c-6c8b-49d6-839e-72f09860a9ce.jpg?v=1775040393"},{"product_id":"carrier-py4gpaa60130aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter Replacement for PY4GPAA60130AA","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter Replacement for PY4GPAA60130AA\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is what lights the burners on your Carrier PY4GPAA60130AA. On each call for heat it draws current and glows white-hot — roughly 1,800 to 2,500 degrees F — to ignite the gas as the valve opens. Igniters are the single most common furnace failure: when this one cracks or wears out you get the inducer and the click of the gas valve but no flame, repeated ignition lockouts (three tries then a long pause), cold air from the registers, or a furnace that short-cycles while trying and failing to light.\n\nSpecs: this is a hot surface igniter built on a silicon carbide element — the fragile gray-black fork style. Cold resistance typically reads in the 40 to 90 ohm range on a multimeter; an open (infinite) reading means it has failed. Many premium replacements upgrade to silicon nitride, which resists thermal-shock cracking and lasts far longer. Confirm the mounting bracket and plug orientation match your original before installing.\n\nOEM vs Generic: igniters live or die on resistance and element quality. A generic igniter with the wrong resistance will not reach full glow temperature, causing delayed-ignition rollout puffs or repeated lockouts; cheap elements also crack after only a few hundred heating cycles. The OEM part matches the exact resistance and glow curve the control board expects.\n\nInstall — difficulty 2\/5. You will need a 1\/4-inch nut driver and clean gloves. Never touch the element with bare fingers — skin oils create hot spots that crack the carbide. Number-one safety warning: shut off both the gas supply and the furnace power before you reach into the burner compartment.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAA60130AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640311009651,"sku":"CARRIE-PY4GPAA60130AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640311042419,"sku":"CARRIE-PY4GPAA60130AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_45590dfa-0174-4262-a00f-360e60c6a4a3.jpg?v=1775035360"},{"product_id":"carrier-py4gpaa60115aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter Replacement for PY4GPAA60115AA","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter Replacement for PY4GPAA60115AA\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is what lights the burners on your Carrier PY4GPAA60115AA. On each call for heat it draws current and glows white-hot — roughly 1,800 to 2,500 degrees F — to ignite the gas as the valve opens. Igniters are the single most common furnace failure: when this one cracks or wears out you get the inducer and the click of the gas valve but no flame, repeated ignition lockouts (three tries then a long pause), cold air from the registers, or a furnace that short-cycles while trying and failing to light.\n\nSpecs: this is a hot surface igniter built on a silicon carbide element — the fragile gray-black fork style. Cold resistance typically reads in the 40 to 90 ohm range on a multimeter; an open (infinite) reading means it has failed. Many premium replacements upgrade to silicon nitride, which resists thermal-shock cracking and lasts far longer. Confirm the mounting bracket and plug orientation match your original before installing.\n\nOEM vs Generic: igniters live or die on resistance and element quality. A generic igniter with the wrong resistance will not reach full glow temperature, causing delayed-ignition rollout puffs or repeated lockouts; cheap elements also crack after only a few hundred heating cycles. The OEM part matches the exact resistance and glow curve the control board expects.\n\nInstall — difficulty 2\/5. You will need a 1\/4-inch nut driver and clean gloves. Never touch the element with bare fingers — skin oils create hot spots that crack the carbide. Number-one safety warning: shut off both the gas supply and the furnace power before you reach into the burner compartment.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAA60115AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640311861619,"sku":"CARRIE-PY4GPAA60115AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640311894387,"sku":"CARRIE-PY4GPAA60115AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_ea59faab-ba36-4ca3-bd8f-d2ccf85e65eb.jpg?v=1775035357"},{"product_id":"carrier-py4gpaa60090aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAA60090AA Package Unit","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAA60090AA Package Unit\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the heart of your Carrier PY4GPAA60090AA's ignition sequence. On every call for heat the control board sends voltage to this element, which glows white-hot to light the gas as it reaches the burners. Because it endures extreme thermal shock on each cycle, the igniter is one of the most common failure points in a gas-electric package unit. When it cracks or burns out you'll see the unit try to start — the inducer spins and you may hear the gas valve click — but no flame catches, the blower never delivers warm air, and after a few retries the board locks out on an ignition fault. An element that glows dull orange instead of bright white, or shows a visible crack, is on its way out.\n\nSpecs: This is a silicon nitride hot surface igniter, the durable successor to brittle silicon carbide tips. Silicon nitride resists the thermal-shock cracking that kills older carbide elements, delivering far longer service life. A healthy igniter reads roughly 40–90 ohms cold on a multimeter; an open (infinite) reading confirms a failed element. Match the bracket and plug orientation to your original.\n\nOEM vs Generic: Generic igniters often use lower-grade ceramic with wider resistance tolerances. If resistance is off, the element won't reach the temperature needed to light gas reliably — causing nuisance lockouts — or it runs hotter than designed and burns out prematurely. The OEM Carrier part matches the exact temperature curve and timing the board expects.\n\nInstall: Difficulty 2\/5. Tools: 1\/4\" nut driver and a multimeter. SAFETY: shut off the gas supply and kill power at the breaker first; never touch the ceramic element with bare fingers — skin oils create hot spots that crack it.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAA60090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640312222067,"sku":"CARRIE-PY4GPAA60090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640312254835,"sku":"CARRIE-PY4GPAA60090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_517a6f70-3bed-4219-a6da-9b0c0baf0c18.jpg?v=1775035354"},{"product_id":"carrier-py4gpaa48130aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAA48130AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAA48130AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor (part number 48VL400002, superseded by 50HJ403022) is the factory-specified replacement ignition component for the \u003cstrong\u003eCarrier PY4GPAA48130AA\u003c\/strong\u003e packaged gas unit. The spark electrode generates the high-voltage arc that ignites the gas burners on each call for heat. When it fails or becomes fouled with carbon deposits, the control board will attempt ignition, fail to detect a flame, and lock out the system — leaving you with no heat and a blinking fault code on the control board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | Superseded by 50HJ403022 — both are factory-authorized Carrier components engineered to identical specifications for the PY4GPAA48130AA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM spark electrodes maintain precise gap geometry and high-temperature ceramic insulator ratings. Off-brand electrodes often have inconsistent gap tolerances, leading to weak or erratic arcing, repeated ignition lockouts, and premature failure under thermal cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Shut off gas supply and 120V power before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, and a multimeter to verify ignitor continuity. Disconnect the high-voltage wire carefully and avoid touching the electrode tip — skin oils can cause ceramic cracking under heat. Photograph wiring before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. Ships same business day from our warehouse when ordered before 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as a direct OEM replacement for the \u003cstrong\u003eCarrier PY4GPAA48130AA\u003c\/strong\u003e packaged gas\/electric unit. Note that 48VL400002 has been superseded by Carrier part 50HJ403022 — both are genuine Carrier components and are functionally identical. Verify your unit's data plate before ordering. Our team is available to confirm fitment before you buy — contact us with your full model and serial number for a guaranteed fit check. \u003cstrong\u003eIn stock — order now and ships today!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640312516979,"sku":"CARRIE-PY4GPAA48130AA-IGNITER-48VL400002","price":62.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640312549747,"sku":"CARRIE-PY4GPAA48130AA-IGNITER-48VL400002-GEN","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_41aca868-13ac-48bd-8336-46fd099e9ad8.jpg?v=1775040370"},{"product_id":"carrier-py4gpaa48115aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor for PY4GPAA48115AA — 48VL400002","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor for Model PY4GPAA48115AA (48VL400002 \/ 50HJ403022)\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAA48115AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor is a critical component in the ignition sequence: on every call for heat, the control board energizes the ignitor to generate a high-voltage spark that lights the burner assembly. When this part fails, the unit will attempt ignition, fail to establish flame, and enter a safety lockout — leaving your space without heat. Common symptoms include a single audible click with no ignition, repeated ignition attempts followed by lockout, or an error code indicating ignition failure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | 50HJ403022 (current OEM replacement) — both are factory-authorized Carrier parts for this unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM igniters are manufactured to Carrier's exact electrode gap, ceramic insulator rating, and cable specifications. Off-brand electrodes frequently exhibit inconsistent spark gap tolerances, premature ceramic cracking, and incompatible connector terminations that can cause intermittent lockouts and shorten ignition module life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and disconnect power before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Note electrode gap and cable routing before removal. Do not touch the ceramic insulator body — skin oils accelerate cracking under heat. Typical service time: 20–30 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by cutoff time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for the Carrier \u003cstrong\u003ePY4GPAA48115AA\u003c\/strong\u003e packaged gas\/electric rooftop unit. OEM part number 48VL400002 has been superseded by Carrier OEM part \u003cstrong\u003e50HJ403022\u003c\/strong\u003e — both are stocked and ship the same day. Verify your unit's data plate and existing ignitor connector style before ordering. Our technical team is available to confirm fitment before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640312844659,"sku":"CARRIE-PY4GPAA48115AA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640312877427,"sku":"CARRIE-PY4GPAA48115AA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_94cdb404-bac0-42f7-a498-593ec35b556a.jpg?v=1775040637"},{"product_id":"carrier-py4gnab60130na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB60130NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GNAB60130NA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor (part number 48VL400002, superseded by 50HJ403022) is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GNAB60130NA\u003c\/strong\u003e packaged gas unit. The spark electrode ignitor generates the high-voltage spark that ignites the gas burner on every call for heat. When this component fails, the control board typically cycles through one or more ignition attempts before entering a hard lockout — leaving you with no heat and a flashing fault code. Common failure symptoms include repeated ignition attempts with no flame establishment, a cracked or fouled electrode tip, or a broken electrode wire.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM part 48VL400002 | Superseded by \/ ships as 50HJ403022 | Fits Carrier, Bryant, and Payne packaged rooftop and split-system gas units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e Factory OEM electrodes are precision-gapped and rated for exact spark intensity required by the burner assembly. Aftermarket spark electrodes frequently use inferior ceramic insulators that crack under thermal cycling, causing intermittent ignition failures and repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 24V\/line-voltage power before starting. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, flashlight. Note electrode gap and wire routing before removal; handle the ceramic insulator with care — do not touch the electrode tip with bare hands as skin oils reduce spark effectiveness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before cutoff.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed as the direct OEM replacement for \u003cstrong\u003eCarrier model PY4GNAB60130NA\u003c\/strong\u003e packaged gas\/electric units. Note that 48VL400002 was discontinued by Carrier in January 2024 and is officially superseded by part number \u003cstrong\u003e50HJ403022\u003c\/strong\u003e — a direct form-fit-function replacement. Verify your unit's data plate and wiring harness connector before ordering. Our team is available to confirm fitment prior to purchase — in stock and ready to ship today.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640313991539,"sku":"CARRIE-PY4GNAB60130NA-IGNITER-48VL400002","price":68.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640314024307,"sku":"CARRIE-PY4GNAB60130NA-IGNITER-48VL400002-GEN","price":60.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_8f1b75a3-03e9-433e-8e45-8a371e0b2284.jpg?v=1775040357"},{"product_id":"carrier-py4gpaa48090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAA48090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor (48VL400002) for Model PY4GPAA48090AA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAA48090AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor generates the high-voltage arc that ignites the main gas burners on each call for heat. When the ignitor fails or becomes fouled, the control board will attempt ignition, detect no flame, and lock out the system — leaving you with a blower running but no heat output. Typical symptoms include a single click-click-click sequence followed by a hard lockout fault code.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Specs:\u003c\/strong\u003e OEM Part# 48VL400002 | Superseded by Carrier P\/N 50HJ403022 | Spark electrode assembly | CSA Listed | Dimensions: 3.25\"H × 1.5\"W | Country of Origin: Mexico\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a Factory Authorized Part built to exact Carrier electrode gap, ceramic insulator rating, and cable length specifications. Off-brand electrodes frequently have inconsistent spark gap tolerances that result in weak or intermittent ignition arcs, shortening heat exchanger and gas valve service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 24V power at the disconnect before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph the electrode wire routing and mounting bracket orientation before removal. Do not touch the ceramic insulator body with bare hands — skin oils accelerate cracking under heat cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. Orders placed by 3:00 PM local time ship same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as the direct OEM replacement for \u003cstrong\u003eCarrier model PY4GPAA48090AA\u003c\/strong\u003e packaged heating and cooling units. Note: Carrier has superseded 48VL400002 with current production part number 50HJ403022 — both numbers are fulfilled from the same factory assembly. Verify electrode mounting bracket style on your unit's burner deck before ordering. Questions about fitment? Our HVAC parts specialists confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640314188147,"sku":"CARRIE-PY4GPAA48090AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640314220915,"sku":"CARRIE-PY4GPAA48090AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_89c300e3-25b5-485a-9598-d71c298cf2fb.jpg?v=1775040367"},{"product_id":"carrier-py4gpaa42090aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GPAA42090AA Package Unit","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GPAA42090AA Package Unit\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter drives the ignition sequence on your Carrier PY4GPAA42090AA. Each time the thermostat calls for heat, the control board energizes this element until it glows white-hot, lighting the gas as it flows into the burners. Subjected to intense thermal stress on every cycle, the igniter is among the most failure-prone parts in a gas-electric package unit. A failed igniter announces itself clearly: the inducer runs and the gas valve clicks, but no flame ignites, no warm air reaches the registers, and after a few retries the board locks out on an ignition fault. An element glowing dull orange instead of brilliant white, or one with a visible crack, is failing.\n\nSpecs: This is a silicon nitride hot surface igniter — the rugged successor to older silicon carbide tips. Silicon nitride shrugs off the thermal shock that cracks brittle carbide, delivering substantially longer life. A healthy igniter measures roughly 40–90 ohms cold on a multimeter; an open (infinite) reading confirms failure. Match the mounting bracket and plug orientation to the original.\n\nOEM vs Generic: Generic igniters commonly use lower-grade ceramic with wider resistance tolerances. When resistance is off, the element either can't reach the temperature needed to light gas reliably — triggering nuisance lockouts — or it overheats and burns out early. The OEM Carrier igniter matches the precise temperature curve and timing the control board expects.\n\nInstall: Difficulty 2\/5. Tools: 1\/4\" nut driver and a multimeter. SAFETY: shut off the gas supply and kill power at the breaker first; never touch the ceramic element with bare fingers — skin oils create hot spots that crack it.\n\nShips same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GPAA42090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640314450291,"sku":"CARRIE-PY4GPAA42090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640314483059,"sku":"CARRIE-PY4GPAA42090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_e5a6dcf2-bf27-4b45-8184-3db09a65c020.jpg?v=1775035352"},{"product_id":"carrier-py4gpaa42060aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAA42060AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GPAA42060AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAA42060AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor generates the high-voltage spark that ignites the gas burner at the start of each heating cycle. When it fails, the control board will attempt ignition, fail to detect a flame, and enter a hard lockout — leaving you with a system that blows cold air or shuts down entirely with an ignition fault code. OEM part number \u003cstrong\u003e48VL400002\u003c\/strong\u003e has been superseded by Carrier's updated replacement \u003cstrong\u003e50HJ403022\u003c\/strong\u003e, and our listing ships the current factory-authorized successor part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode ignitor assembly | Factory-authorized OEM replacement | Includes electrode rod, mounting bracket, and ignition wire lead | Replaces 48VL400002, 50HJ401430, 50HJ400608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM electrodes are manufactured to exact gap geometry and ceramic insulator specifications. Off-brand electrodes can produce inconsistent spark arcs, cause nuisance lockouts, and accelerate control board wear over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and 24V control power before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Note electrode tip gap and orientation before removal. Avoid touching the ceramic insulator — oil from skin can cause cracking under heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the \u003cstrong\u003eCarrier PY4GPAA42060AA\u003c\/strong\u003e packaged rooftop gas\/electric unit. OEM part 48VL400002 is discontinued and superseded — we ship the current Carrier-authorized successor (50HJ403022) for guaranteed fitment. Verify your unit's data plate model number before ordering. Our team is happy to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640315007347,"sku":"CARRIE-PY4GPAA42060AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640315040115,"sku":"CARRIE-PY4GPAA42060AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_5424b702-9bf3-4841-99c4-6c7abb3399ff.jpg?v=1775040364"},{"product_id":"carrier-py4gpaa36090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAA36090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 \/ 50HJ403022 for Model PY4GPAA36090AA\u003c\/h1\u003e\u003cp\u003eThis is the factory OEM spark electrode ignitor assembly for the \u003cstrong\u003eCarrier PY4GPAA36090AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode generates the high-voltage arc that ignites the gas burner on each heating call. When this component fails or becomes fouled with carbon deposits, the control board will attempt ignition, detect no flame, and enter a safety lockout — leaving you with a system that clicks repeatedly but never fires, or one that shuts down with a no-heat fault code. Replacing the ignitor with the correct OEM assembly restores factory-spec spark gap, arc intensity, and electrode position for reliable, safe ignition every time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | 50HJ403022 (current Carrier OEM supersession — direct drop-in replacement) | Also supersedes 50HJ401430 and 50HJ400608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM electrodes are manufactured to Carrier's exact ceramic insulator grade, spark gap, and bracket geometry. Aftermarket spark electrodes frequently use inferior ceramics that crack under thermal cycling, shifting the spark gap and causing intermittent ignition failures within one to two seasons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and 24V control power before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Disconnect the ignition wire and ground lead, remove the mounting bracket screws, swap the electrode, and re-gap if required per unit wiring diagram. Always verify ceramic insulator integrity before reinstalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for Carrier model \u003cstrong\u003ePY4GPAA36090AA\u003c\/strong\u003e packaged gas\/electric rooftop units. Note that OEM part number 48VL400002 has been superseded by Carrier part 50HJ403022 — both part numbers are fulfilled with the current production assembly. Verify your existing electrode style and bracket configuration against your unit's wiring diagram before ordering. Our fitment team is available to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640315269491,"sku":"CARRIE-PY4GPAA36090AA-IGNITER-48VL400002","price":67.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640315302259,"sku":"CARRIE-PY4GPAA36090AA-IGNITER-48VL400002-GEN","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_f8055797-4118-4e2a-88a5-89e046b2bb18.jpg?v=1775040362"},{"product_id":"carrier-py4gpaa36060aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Igniter for PY4GPAA36060AA — 48VL400002","description":"\u003ch1\u003eOEM Carrier Spark Electrode Igniter (48VL400002) for Model PY4GPAA36060AA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode igniter for the \u003cstrong\u003eCarrier PY4GPAA36060AA\u003c\/strong\u003e packaged gas unit. The spark electrode igniter is responsible for generating the high-voltage arc that lights the burner on each heating cycle. When it fails or degrades, the control board will attempt ignition, detect no flame, and lock out — leaving you with no heat and a fault code. Replacing it with the correct OEM part restores reliable first-try ignition and prevents nuisance lockouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | Superseded by 50HJ403022 — both are fulfilled as genuine Carrier Factory Authorized Parts. L-shaped electrode design | Total assembly length: approx. 2¾\" | Country of Origin: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM electrodes are manufactured to exact factory gap and geometry specifications. Aftermarket electrodes often have inconsistent tip spacing, which causes weak or misfired sparks, increased ignition retry cycles, and premature control board wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Straightforward replacement on most packaged rooftop units. Tools needed: ¼\" and 5\/16\" nut drivers, needle-nose pliers. IMPORTANT: Shut off gas supply and disconnect power at the disconnect box before servicing. Handle the electrode tip carefully — the ceramic insulator is fragile and will crack if dropped or flexed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by 3:00 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for the Carrier \u003cstrong\u003ePY4GPAA36060AA\u003c\/strong\u003e packaged gas\/electric unit. This part supersedes OEM part number 48VL400002 and ships as 50HJ403022 — a direct, factory-approved replacement with identical fit, form, and function. Always verify your unit's data plate and wiring diagram before ordering. Our team is available to confirm fitment — contact us before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640316121459,"sku":"CARRIE-PY4GPAA36060AA-IGNITER-48VL400002","price":66.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640316154227,"sku":"CARRIE-PY4GPAA36060AA-IGNITER-48VL400002-GEN","price":58.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_262f96e5-3a75-404c-9831-aed19b504a16.jpg?v=1775039973"},{"product_id":"carrier-py4gpaa30060aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor Assembly for PY4GPAA30060AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor Assembly 48VL400002 for Model PY4GPAA30060AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor assembly is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAA30060AA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor generates the high-voltage spark that lights the burner's gas mixture on every call for heat. When it fails, the control board will attempt ignition, detect no flame, and lock out the unit — leaving you with no heat and a fault code. Common symptoms include the unit cycling on and off repeatedly, or a hard lockout requiring a manual reset at the thermostat or board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e L-shaped spark electrode design | Ignitor length to L: 1-3\/8\" | Ground length to L: 2-1\/16\" | Total length: 4\" | Bracket length: 1-5\/8\" | Country of origin: USA | OEM Part Number: 48VL400002 (superseded by 50HJ403022)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine Carrier factory-authorized ignitor assembly, precision-matched to the PY4GPAA30060AA's ignition module and spark gap specifications. Generic electrodes often use inferior alloys that corrode faster or produce inconsistent spark gaps, leading to nuisance lockouts and premature failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and disconnect power at the disconnect switch before beginning. Tools needed: 1\/4\" or 5\/16\" nut driver, needle-nose pliers. Note electrode orientation and wire routing before disconnecting. Handle the ceramic insulator carefully — do not touch the electrode tip with bare hands, as skin oils accelerate fouling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer's warranty against defects. Orders ship same business day from our warehouse when placed before cutoff.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for the \u003cstrong\u003eCarrier PY4GPAA30060AA\u003c\/strong\u003e packaged rooftop\/gas-electric unit. Note that OEM part number 48VL400002 has been superseded by Carrier part number 50HJ403022 — both are the identical assembly and covered by this listing. Verify your existing electrode's L-shape profile and bracket mounting before ordering. Not sure? Our fitment team confirms compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640316449139,"sku":"CARRIE-PY4GPAA30060AA-IGNITER-48VL400002","price":59.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640316481907,"sku":"CARRIE-PY4GPAA30060AA-IGNITER-48VL400002-GEN","price":52.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_2598eee4-9b6c-408a-baf8-141bc51adf4e.jpg?v=1775040588"},{"product_id":"carrier-py4gpaa30040aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GPAA30040AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor (48VL400002) for Model PY4GPAA30040AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GPAA30040AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor generates the high-voltage spark that ignites the gas burner on each heating call. When the ignitor fails or becomes fouled, the control board will attempt ignition, detect no flame, and lock out the system — leaving you with a unit that cycles but delivers no heat. Replacing the ignitor with the correct OEM part restores reliable ignition and prevents nuisance lockouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e OEM Carrier 48VL400002 | Current superseding part: 50HJ403022 (also replaces 50HJ401430, 50HJ400608) | Factory-authorized genuine Carrier component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM spark electrodes are matched to the factory gap specification and ceramic insulator rating of your unit. Generic electrodes often use inferior ceramics that crack under thermal cycling, causing intermittent spark failure and repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and disconnect power before starting. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Note wire routing and connector orientation before removal. Handle ceramic insulator carefully — do not contact the electrode tip with bare hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the Carrier \u003cstrong\u003ePY4GPAA30040AA\u003c\/strong\u003e packaged rooftop\/gas-electric unit. Always verify your unit's data plate and existing part number before ordering — part number 50HJ403022 is the current OEM cross-reference for 48VL400002. Our HVAC parts specialists are available to confirm fitment before you buy. Order today for same-day shipping.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640316711283,"sku":"CARRIE-PY4GPAA30040AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640316744051,"sku":"CARRIE-PY4GPAA30040AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_4e9e3ef5-9d34-44e2-815b-8a8e9e03c77a.jpg?v=1775040359"},{"product_id":"carrier-py4gnab60130aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB60130AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB60130AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is what actually lights the burners in your Carrier PY4GNAB60130AA. On each call for heat the control board sends voltage to the igniter, it glows white-hot, and the gas valve opens onto that glowing element to start combustion. When an igniter is failing you'll see the furnace try and fail to light — short-cycling, the blower running cold air, repeated relay clicking, and on many boards a hard lockout after three or four failed attempts. A cracked igniter may still glow dimly but never reach ignition temperature, leaving you with no heat on the coldest nights.\n\nThis OEM igniter is matched to the furnace's ignition control, with a cold resistance in the typical 40-90 ohm range for its element type. Carrier's modern furnaces use a robust silicon nitride element — more impact- and crack-resistant and far longer-lived than the brittle silicon carbide \"flat\" style it replaced — so you get faster glow time and much better survivability against repeated thermal cycling.\n\nIgniter resistance is everything. An aftermarket element with the wrong resistance either won't draw enough current to reach ignition temperature — so the gas never lights — or runs too hot and burns out within a season. Generic silicon carbide replacements are especially fragile and crack from ordinary handling and vibration. The OEM silicon nitride igniter glows at the correct temperature and tolerates years of on\/off cycling.\n\nInstall difficulty: 2 of 5. Tools: 1\/4\" nut driver, a multimeter to read element resistance, and clean gloves — skin oils create hot spots that crack the element, so handle it only by the ceramic base. #1 safety rule: turn off both the gas supply and the electrical power before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB60130AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640317825395,"sku":"CARRIE-PY4GNAB60130AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640317858163,"sku":"CARRIE-PY4GNAB60130AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_70ff7d7a-dfdf-4227-bd65-047b9a42a822.jpg?v=1775035349"},{"product_id":"carrier-py4gnab60115na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB60115NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB60115NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the component that lights the burners in your Carrier PY4GNAB60115NA. Every time the thermostat calls for heat, the control board energizes the igniter until it glows white-hot, then opens the gas valve so fuel ignites against that glowing element. A worn or cracked igniter shows up as a furnace that ignites intermittently or not at all — short-cycling, cold air from the registers, audible relay clicking with no \"whoomp\" of ignition, and a control board that locks out after several failed tries. An igniter that glows but never gets hot enough is one of the most common no-heat callbacks of the winter.\n\nThis OEM igniter matches the furnace's ignition control circuit, with a cold resistance in the typical 40-90 ohm band for its element type. Carrier specifies a durable silicon nitride element here — it resists cracking, vibration, and thermal shock far better than the older brittle silicon carbide style, and it reaches ignition temperature faster.\n\nResistance and material are what separate a part that lasts from one that fails. A generic igniter with out-of-spec resistance either won't pull enough current to glow hot enough to light gas, or overheats and fails prematurely. Cheap silicon carbide replacements crack from a fingertip touch. The OEM silicon nitride igniter glows at the designed temperature and survives years of cycling.\n\nInstall difficulty: 2 of 5. Tools: 1\/4\" nut driver, a multimeter for resistance, and clean gloves — handle the element only by its ceramic base, since skin oils create hot spots that crack it. #1 safety rule: shut off the gas supply and the electrical power before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB60115NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640318022003,"sku":"CARRIE-PY4GNAB60115NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640318054771,"sku":"CARRIE-PY4GNAB60115NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_f09d757e-76a7-44ed-acd9-038444f539fa.jpg?v=1775035347"},{"product_id":"carrier-py4gnab60115aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter 48VL400002 for PY4GNAB60115AA","description":"\u003ch1\u003eOEM Carrier Hot Surface Spark Electrode Igniter 48VL400002 for Model PY4GNAB60115AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode igniter (Part# \u003cstrong\u003e48VL400002\u003c\/strong\u003e) is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GNAB60115AA\u003c\/strong\u003e packaged gas\/electric unit. The hot surface igniter is the first component in every heating cycle — it heats to ignition temperature to light the gas burner. When it cracks, burns out, or fails to reach proper temperature, the control board cannot confirm ignition and the system enters \u003cstrong\u003ehard lockout\u003c\/strong\u003e, leaving you with no heat and a blinking fault code. Replacing this OEM igniter restores reliable ignition and eliminates nuisance no-heat service calls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode \/ hot surface igniter | Factory OEM part for Carrier PY4GNAB60115AA | 120V ignition circuit compatible | Direct drop-in replacement — no modifications required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine Carrier OEM igniter, manufactured to exact factory geometry, element composition, and temperature rise specs. Generic igniters often have mismatched standoff dimensions or inferior silicon carbide formulations that crack prematurely under thermal cycling, leading to repeat failures within one season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and 120V power before starting. Tools needed: 1\/4\" nut driver, flat-blade screwdriver, needle-nose pliers. Avoid touching the igniter element with bare hands — skin oils cause hot spots that shorten service life. Photograph all wire connections before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as a direct OEM replacement for \u003cstrong\u003eCarrier model PY4GNAB60115AA\u003c\/strong\u003e packaged gas\/electric units. Always verify your existing igniter's mounting bracket configuration and wire harness connector type against your unit's data plate before ordering. Have a question about fitment? Our HVAC parts specialists verify compatibility before you buy — reach out before placing your order.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640318284147,"sku":"CARRIE-PY4GNAB60115AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640318316915,"sku":"CARRIE-PY4GNAB60115AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_47d9cdd3-e7d3-479c-93a8-269a527da9ef.jpg?v=1775033770"},{"product_id":"carrier-py4gnab60090na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB60090NA | 48VL400002","description":"\u003ch1\u003eOEM Carrier Hot Surface Igniter (Spark Electrode) for Model PY4GNAB60090NA — Part #48VL400002\u003c\/h1\u003e\u003cp\u003eThis is the factory OEM hot surface igniter (spark electrode) for the \u003cstrong\u003eCarrier PY4GNAB60090NA\u003c\/strong\u003e packaged gas unit. The igniter is the first component to act in every heating cycle — it heats to approximately 2,500°F to ignite the gas burner. When it fails, the control board will attempt ignition, detect no flame, and trigger a lockout — leaving you with a system that attempts to start but delivers no heat. If your unit is locking out after 1–3 ignition trials, a cracked or failed igniter is the most common cause.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 | Carrier factory-original spark electrode ignitor | Direct drop-in replacement with no modification required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM igniters are manufactured to exact resistance and thermal-shock specifications for your Carrier control board. Generic substitutes often have mismatched resistance values, causing nuisance lockouts or premature failure within one heating season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Straightforward swap accessible from the burner compartment. Tools needed: 1\/4\" and 5\/16\" nut driver, needle-nose pliers. \u003cstrong\u003eImportant:\u003c\/strong\u003e Never touch the igniter element with bare hands — skin oils cause hot spots and early cracking. Use gloves or handle by the bracket only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered as the OEM direct replacement for \u003cstrong\u003eCarrier PY4GNAB60090NA\u003c\/strong\u003e packaged gas\/electric units. Always verify your existing igniter's mounting bracket style and connector type against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment before you buy — no guesswork required.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640318415219,"sku":"CARRIE-PY4GNAB60090NA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640318447987,"sku":"CARRIE-PY4GNAB60090NA-IGNITER-48VL400002-GEN","price":68.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_e4bc0127-5c08-4a52-a161-3b710f9e065b.jpg?v=1775035345"},{"product_id":"carrier-py4gnab60090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB60090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GNAB60090AA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode ignitor for the \u003cstrong\u003eCarrier PY4GNAB60090AA\u003c\/strong\u003e packaged gas unit. The spark electrode ignitor is the critical component responsible for igniting the gas burner during every heating cycle. When this part fails, the control board will attempt ignition, detect no flame, and lock out the system — leaving you with a unit that calls for heat but delivers none. Common symptoms include repeated ignition attempts followed by a hard lockout fault code, or a visible crack or carbon tracking on the ceramic electrode body.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 48VL400002 (superseded by Carrier OEM part 50HJ403022) | Factory Authorized Parts designation | Genuine Carrier spark electrode assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM igniters are manufactured to exact Carrier spark gap, ceramic grade, and wire harness specifications. Aftermarket electrodes frequently exhibit premature ceramic cracking or inconsistent spark gap tolerances, leading to nuisance lockouts and repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Disconnect power and shut off gas supply before beginning. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, and a multimeter to verify ignition circuit continuity. Photograph all wire harness connections before removal. Handle ceramic electrode body with care — do not touch with bare hands, as skin oils can cause premature failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed as the direct OEM replacement ignitor for the \u003cstrong\u003eCarrier PY4GNAB60090AA\u003c\/strong\u003e packaged gas\/electric unit. Original part number 48VL400002 has been superseded by Carrier OEM part 50HJ403022 — both numbers are cross-referenced and the current production part ships in its place. Always verify your unit's data plate and wiring diagram before ordering. Our parts specialists are available to confirm fitment before you buy — no heat, no problem. Order now and ship today.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640318710131,"sku":"CARRIE-PY4GNAB60090AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640318742899,"sku":"CARRIE-PY4GNAB60090AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_e67fe70c-9694-478b-bc7c-406e2503dff1.jpg?v=1775040355"},{"product_id":"carrier-py4gnab48130na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB48130NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GNAB48130NA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor (part number 48VL400002, superseded by 50HJ403022) is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GNAB48130NA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode ignitor generates the high-voltage electrical arc that ignites the gas burner at the start of every heat cycle. When it fails or cracks, the control board will attempt ignition, detect no flame, and lock out the system — leaving you with a unit that blows cold air or shuts down entirely after a brief startup attempt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM part 48VL400002 | Current superseding OEM part: 50HJ403022 | Factory-authorized direct replacement — no modifications required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM spark electrodes are precision-gapped and rated to factory specifications for arc voltage and ceramic insulator integrity. Generic igniters often use inferior ceramic insulators prone to early cracking, risking carbon tracking and ignition failure under thermal cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Turn off gas supply and disconnect power before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers, work gloves. Photograph the electrode orientation and wiring harness routing before removal. Handle the ceramic body carefully — do not touch the tip with bare hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. Ships same business day from our warehouse when ordered before cutoff.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for the \u003cstrong\u003eCarrier PY4GNAB48130NA\u003c\/strong\u003e packaged unit. Note that OEM part 48VL400002 has been officially superseded by Carrier part 50HJ403022 — both are fully interchangeable and meet identical factory specifications. Verify your unit's data plate and existing electrode configuration before ordering. Our fitment team is available to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640318972275,"sku":"CARRIE-PY4GNAB48130NA-IGNITER-48VL400002","price":58.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640319005043,"sku":"CARRIE-PY4GNAB48130NA-IGNITER-48VL400002-GEN","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_951a7a93-8b6a-4e82-99a3-1ebc342c7138.jpg?v=1775040352"},{"product_id":"carrier-py4gnab48130aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB48130AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GNAB48130AA\u003c\/h1\u003e\u003cp\u003eThis OEM spark electrode ignitor is the factory-specified replacement for the \u003cstrong\u003eCarrier PY4GNAB48130AA\u003c\/strong\u003e packaged gas\/electric unit. The spark electrode assembly generates the high-voltage arc that ignites the burner on each heating call. When it fails or cracks, the control board will attempt ignition, detect no flame, and lock out — leaving you with no heat. Common symptoms include repeated ignition attempts followed by a lockout fault code, a visible crack in the ceramic insulator, or carbon tracking on the electrode tip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e 48VL400002 (original) | Superseded by 50HJ403022 — both are factory-authorized and ship as the current OEM assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Spark electrode ignitor assembly | Genuine Carrier Factory Authorized Part | Designed for packaged rooftop and gas\/electric combination units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Disconnect power and gas before servicing. Tools needed: 1\/4\" nut driver, needle-nose pliers, voltage meter. Handle the ceramic electrode tip carefully — oils from bare hands can cause premature failure. Always verify spark gap per unit service manual before reinstalling panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by 3 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for Carrier model \u003cstrong\u003ePY4GNAB48130AA\u003c\/strong\u003e packaged gas\/electric units. OEM part 48VL400002 has been superseded by 50HJ403022 — both numbers are cross-referenced and the current assembly ships as the active replacement. Verify your unit's data plate and existing ignitor style before ordering. Not sure if this fits? Our HVAC parts specialists confirm fitment before you buy — contact us today and get your unit back online fast.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640319267187,"sku":"CARRIE-PY4GNAB48130AA-IGNITER-48VL400002","price":65.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640319299955,"sku":"CARRIE-PY4GNAB48130AA-IGNITER-48VL400002-GEN","price":57.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_19abba45-3ce9-4357-b51a-de2fb4dcd97c.jpg?v=1775040350"},{"product_id":"carrier-py4gnab48115na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB48115NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB48115NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the part that ignites the burners in your Carrier PY4GNAB48115NA. With each call for heat the control board energizes the igniter until it glows white-hot, then the gas valve opens so fuel lights against that glowing element. A failing igniter reveals itself as a furnace that struggles to light — short-cycling, cold air blowing from the vents, repeated relay clicking without the \"whoomp\" of ignition, and a board that locks out after several failed attempts. An igniter that glows dimly but never reaches ignition temperature is one of winter's most common no-heat failures.\n\nThis OEM igniter matches the furnace's ignition control, with a cold resistance in the typical 40-90 ohm range for its element type. Carrier specifies a durable silicon nitride element — far more resistant to cracking, vibration, and thermal shock than the older brittle silicon carbide style, and it reaches ignition temperature faster and lasts longer.\n\nResistance and material decide whether an igniter lasts or fails fast. A generic element with the wrong resistance either won't draw enough current to glow hot enough to light gas, or runs too hot and burns out within a season. Cheap silicon carbide replacements crack from ordinary handling. The OEM silicon nitride igniter glows at the correct temperature and survives years of cycling.\n\nInstall difficulty: 2 of 5. Tools: 1\/4\" nut driver, a multimeter for resistance, and clean gloves — handle the element only by its ceramic base, since skin oils create hot spots that crack it. #1 safety rule: shut off both the gas supply and the electrical power before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB48115NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640319398259,"sku":"CARRIE-PY4GNAB48115NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640319431027,"sku":"CARRIE-PY4GNAB48115NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_c337a0c4-3c85-49b0-aeea-47e0d5f165e9.jpg?v=1775035342"},{"product_id":"carrier-py4gnab48115aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB48115AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB48115AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the component that lights the burners in your Carrier PY4GNAB48115AA. On every call for heat the control board energizes the igniter until it glows white-hot, then opens the gas valve so fuel ignites against the glowing element. When the igniter is failing the furnace tries and fails to light — short-cycling, cold air from the vents, repeated relay clicking with no ignition, and a control board that locks out after three or four failed attempts. A cracked igniter that glows dimly but never reaches ignition temperature is a leading cause of no-heat calls.\n\nThis OEM igniter is matched to the furnace's ignition control, with a cold resistance in the typical 40-90 ohm range for its element type. Carrier uses a rugged silicon nitride element here — much more resistant to cracking, vibration, and thermal shock than the older brittle silicon carbide style, with faster glow time and a longer service life.\n\nResistance and element material determine whether your igniter lasts. A generic part with the wrong resistance either won't pull enough current to glow hot enough to ignite gas, or overheats and burns out in a single season. Cheap silicon carbide replacements crack from ordinary handling and vibration. The OEM silicon nitride igniter glows at the designed temperature and tolerates years of on\/off cycling.\n\nInstall difficulty: 2 of 5. Tools: 1\/4\" nut driver, a multimeter to read element resistance, and clean gloves — handle the element only by its ceramic base, because skin oils create hot spots that crack it. #1 safety rule: turn off both the gas supply and the electrical power before removing the old igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB48115AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640319857011,"sku":"CARRIE-PY4GNAB48115AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640319889779,"sku":"CARRIE-PY4GNAB48115AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_0a15a41a-1dd0-40c4-86fc-993e5cd74a95.jpg?v=1775035339"},{"product_id":"carrier-py4gnab48090na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB48090NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB48090NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the component that lights the gas as it enters the burner assembly of your PY4GNAB48090NA furnace. On every call for heat, the control board sends 120V to the igniter, which glows orange-hot and lights the burners. When an igniter weakens or cracks, the classic symptom is a furnace that tries to start but never produces heat — you'll hear the inducer motor spin up and the gas valve click, but the burners never light. Many homeowners notice short-cycling, a furnace that locks out after three failed tries, or a cold house despite the thermostat calling for heat. A visibly cracked element, or one that glows dull red instead of bright orange, is on its way out.\n\nSpecs: This is a genuine OEM silicon nitride hot surface igniter rated for 120VAC operation with a typical cold resistance in the 40–75 ohm range. Silicon nitride elements are far more durable and thermal-shock resistant than older silicon carbide igniters, tolerating thousands of ignition cycles without the brittle cracking that plagues carbide units.\n\nOEM vs Generic: Igniter resistance is critical. A generic igniter with the wrong resistance won't draw the correct current — too high and it never glows hot enough to light gas reliably; too low and it burns out prematurely. OEM units are matched to your furnace's ignition-control timing for consistent light-off and full element life.\n\nInstall: Difficulty 2 of 5. Tools: 1\/4\" nut driver and clean gloves. SAFETY: Turn off both the gas supply and the furnace breaker before servicing. Never touch the ceramic element with bare fingers — skin oils create hot spots that crack the igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB48090NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640319988083,"sku":"CARRIE-PY4GNAB48090NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640320020851,"sku":"CARRIE-PY4GNAB48090NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_ac500e62-0594-49fb-a761-25f783967615.jpg?v=1775035337"},{"product_id":"carrier-py4gnab48090aa-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB48090AA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB48090AA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the part that ignites the gas entering the burner assembly of your PY4GNAB48090AA furnace. Each time the thermostat calls for heat, the control board energizes the igniter with 120V; it glows orange-hot and lights the burners. When the igniter degrades or cracks, the most common complaint is a furnace that attempts to start but produces no heat — the inducer motor runs and the gas valve clicks, yet the burners stay dark. Homeowners frequently report short-cycling, a unit that locks out after three failed ignition attempts, or no heat at all while the thermostat keeps calling. A cracked element or one glowing dull red rather than bright orange is failing.\n\nSpecs: A genuine OEM silicon nitride hot surface igniter rated for 120VAC with a typical cold resistance of roughly 40–75 ohms. Silicon nitride is tougher and more thermal-shock resistant than legacy silicon carbide, surviving thousands of ignition cycles without the brittle cracking carbide igniters are known for.\n\nOEM vs Generic: Resistance is everything in an igniter. A generic part with off-spec resistance draws the wrong current — too high and it never reaches the temperature needed to light gas reliably; too low and it fails early. OEM igniters are matched to your furnace's control timing for dependable light-off and full service life.\n\nInstall: Difficulty 2 of 5. Tools: 1\/4\" nut driver and clean gloves. SAFETY: Shut off the gas supply and the furnace breaker before servicing. Never handle the ceramic element with bare fingers — skin oils create hot spots that crack it.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB48090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640321036659,"sku":"CARRIE-PY4GNAB48090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640321069427,"sku":"CARRIE-PY4GNAB48090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_034ef6f0-8551-4765-a5e6-2f23f2402274.jpg?v=1775035334"},{"product_id":"carrier-py4gnab42090na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter for PY4GNAB42090NA Gas Furnace","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Hot Surface Igniter for PY4GNAB42090NA Gas Furnace\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter lights the gas as it enters the burner assembly of your PY4GNAB42090NA furnace. On each call for heat, the control board sends 120V to the igniter, which glows orange-hot and ignites the burners. When the igniter weakens or cracks, the hallmark symptom is a furnace that tries to start but never produces heat — the inducer motor spins up and the gas valve clicks, but the burners never light. Many homeowners notice short-cycling, a furnace that locks out after three failed attempts, or a cold house while the thermostat keeps calling for heat. A cracked element, or one that glows dull red instead of bright orange, is failing.\n\nSpecs: Genuine OEM silicon nitride hot surface igniter rated for 120VAC with a typical cold resistance of about 40–75 ohms. Silicon nitride is more durable and thermal-shock resistant than older silicon carbide, surviving thousands of ignition cycles without the brittle cracking carbide units are prone to.\n\nOEM vs Generic: Igniter resistance is critical. A generic igniter with the wrong resistance draws the wrong current — too high and it never glows hot enough to light gas reliably; too low and it burns out early. OEM igniters are matched to your furnace's ignition-control timing for consistent light-off and full element life.\n\nInstall: Difficulty 2 of 5. Tools: 1\/4\" nut driver and clean gloves. SAFETY: Turn off both the gas supply and the furnace breaker before servicing. Never touch the ceramic element with bare fingers — skin oils create hot spots that crack the igniter.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB42090NA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640321298803,"sku":"CARRIE-PY4GNAB42090NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640321331571,"sku":"CARRIE-PY4GNAB42090NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_0d7fcab3-8da3-440c-a956-cf06a4e762a1.jpg?v=1775035332"},{"product_id":"carrier-py4gnab42090aa-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB42090AA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GNAB42090AA\u003c\/h1\u003e\u003cp\u003eThis is the OEM factory-specified spark electrode ignitor for the \u003cstrong\u003eCarrier PY4GNAB42090AA\u003c\/strong\u003e packaged gas\/electric unit. The ignitor is responsible for generating the high-voltage spark that lights the gas burners on every call for heat. When this component fails, the control board will attempt ignition, detect no flame signal, and lock out the system — leaving you with a blower that runs but no heat output. A failed ignitor is one of the most common no-heat service calls and is a straightforward DIY or tech replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e Spark electrode ignitor assembly | OEM Part # 48VL400002 (superseded by 50HJ403022) | Factory-matched electrode gap and ceramic insulator | Compatible with Carrier packaged rooftop and gas\/electric units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e This is a genuine Carrier OEM ignitor built to exact factory electrode gap tolerances. Aftermarket igniters often exhibit inconsistent spark timing and ceramic cracking under thermal cycling, leading to premature failure and repeat service calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and disconnect power before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph wire routing and connector orientation before disconnecting. Handle the ceramic insulator with care — do not touch with bare hands as skin oils can cause premature cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered by 3:00 PM local time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e Designed for the Carrier \u003cstrong\u003ePY4GNAB42090AA\u003c\/strong\u003e packaged gas\/electric unit. Note that OEM part number 48VL400002 has been superseded by Carrier part number 50HJ403022 — both are fully compatible and interchangeable for this application. Always verify your unit's model and data plate before ordering. Our fitment specialists are available to confirm compatibility before you buy.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640321560947,"sku":"CARRIE-PY4GNAB42090AA-IGNITER-48VL400002","price":77.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640321593715,"sku":"CARRIE-PY4GNAB42090AA-IGNITER-48VL400002-GEN","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_2b012157-55ee-4293-92fc-a47d8382d4bc.jpg?v=1775040347"},{"product_id":"carrier-py4gnab42060na-igniter-1kzbpu","title":"OEM Carrier Spark Electrode Ignitor 48VL400002 for PY4GNAB42060NA","description":"\u003ch1\u003eOEM Carrier Spark Electrode Ignitor Assembly 48VL400002 for Model PY4GNAB42060NA\u003c\/h1\u003e\u003cp\u003eThis OEM Carrier spark electrode ignitor assembly (part 48VL400002, superseded by 50HJ403022) is the factory-specified replacement ignitor for the \u003cstrong\u003eCarrier PY4GNAB42060NA\u003c\/strong\u003e packaged gas unit. The spark electrode generates the high-voltage arc that directly ignites the gas burner on each heating call. When this component fails, the control board will attempt ignition one to three times, then lock out — leaving you with a blinking fault code and no heat. Common failure symptoms include the system attempting to light with an audible click but no flame, repeated ignition lockouts, or a visibly cracked or carbon-fouled electrode tip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e OEM part 48VL400002 | Current superseding OEM part: 50HJ403022 | Factory Authorized Parts (FAP) for Carrier, Bryant \u0026amp; Payne equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM spark electrodes are precision-gapped and rated to factory ceramic insulator specs. Aftermarket electrodes frequently suffer from incorrect gap spacing or inferior ceramic that cracks under thermal cycling, causing repeat no-ignition calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 2\/5\u003c\/strong\u003e — Shut off gas supply and disconnect power at the disconnect box before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, needle-nose pliers. Photograph the existing electrode position and wire routing before removal. Avoid touching the ceramic insulator with bare hands — skin oils accelerate ceramic degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against manufacturing defects. Ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered for the Carrier \u003cstrong\u003ePY4GNAB42060NA\u003c\/strong\u003e packaged rooftop\/gas unit. Note that OEM part 48VL400002 has been superseded by Carrier part 50HJ403022 — both part numbers are fulfilled with the current production version. Always verify your unit's model and serial data plate before ordering. Our team is available to confirm fitment prior to purchase.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640321921395,"sku":"CARRIE-PY4GNAB42060NA-IGNITER-48VL400002","price":55.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640321954163,"sku":"CARRIE-PY4GNAB42060NA-IGNITER-48VL400002-GEN","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_d9120626-c481-4159-9f6a-e9a0c78560e5.jpg?v=1775040345"},{"product_id":"carrier-py4gnab42060aa-igniter-1kzbpu","title":"OEM Carrier Silicon Nitride Hot Surface Igniter for PY4GNAB42060AA","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Silicon Nitride Hot Surface Igniter for PY4GNAB42060AA\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the ignition source for your Carrier gas furnace. On every call for heat the control board energizes the igniter, which glows to roughly 2,000°F and lights the burner gas. When it fails you'll notice the blower running but pushing cold air, the furnace clicking and trying to fire then locking out after three attempts, a delayed ignition \"poof,\" or no heat at all on the coldest nights. A cracked or worn element is the single most common cause of a no-heat service call.\n\nThis is a silicon nitride hot surface igniter, far more durable than older silicon carbide elements that crack from thermal shock and handling. Cold resistance typically reads in the 40–75 ohm range; an open circuit (OL on your meter) confirms a failed element. It is built for 120 VAC line-voltage ignition systems.\n\nIgniter resistance is matched to your control board's current limits. A generic igniter with the wrong resistance either won't glow hot enough to reliably light gas — causing rough, delayed ignition — or draws excess current that shortens the board's relay life. OEM silicon nitride elements also resist the micro-cracking that ends most generic igniters within a single heating season.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver and a multimeter; allow about 20 minutes. #1 safety warning: turn off the gas supply and kill power at the furnace breaker before servicing, and never touch the element with bare fingers — skin oils create hot spots that crack the ceramic.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB42060AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640322183539,"sku":"CARRIE-PY4GNAB42060AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640322216307,"sku":"CARRIE-PY4GNAB42060AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_360c4e6e-2fb9-47ab-9d86-98ac015e1361.jpg?v=1775035329"},{"product_id":"carrier-py4gnab36090na-igniter-1kzbpu","title":"OEM Carrier Hot Surface Igniter 48VL400002 for PY4GNAB36090NA","description":"\u003ch1\u003eOEM Carrier Hot Surface Igniter 48VL400002 for Model PY4GNAB36090NA\u003c\/h1\u003e\u003cp\u003eThis is the factory-specified OEM hot surface igniter (spark electrode ignitor) for the \u003cstrong\u003eCarrier PY4GNAB36090NA\u003c\/strong\u003e packaged gas\/electric unit. The hot surface igniter is the component responsible for igniting the gas burner on every call for heat. When it fails, the control board will attempt ignition, detect no flame, and lock the system out — leaving you with a blinking error code and no heat. Replacing this igniter with the correct OEM part restores safe, reliable ignition performance matched to the factory control board's timing sequence.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs:\u003c\/strong\u003e OEM Part# 48VL400002 | Spark Electrode Ignitor (Hot Surface Type) | Factory-matched to Carrier PY4GNAB36090NA burner assembly | Designed for precise positioning and gap tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM vs Generic:\u003c\/strong\u003e OEM igniters are manufactured to exact resistance and geometry tolerances for your specific burner. Generic alternatives can vary in tip geometry and element composition, leading to repeated ignition failures, premature cracking, or nuisance lockouts that a generic part cannot fix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Difficulty: 3\/5\u003c\/strong\u003e — Gas appliance repair. Turn off gas supply and 24V power before servicing. Tools needed: 1\/4\" and 5\/16\" nut drivers, flat-head screwdriver. Handle the igniter ceramic body with care — skin oils can cause premature failure. Never force the mounting bracket. Photograph wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year OEM factory warranty against defects. In-stock and ships same business day from our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Engineered specifically for the \u003cstrong\u003eCarrier PY4GNAB36090NA\u003c\/strong\u003e packaged unit. Verify your model and serial number on the unit data plate before ordering. If you need fitment confirmation, our HVAC parts specialists are available to verify compatibility before you buy — same-day shipping on all in-stock orders.\u003c\/p\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640322445683,"sku":"CARRIE-PY4GNAB36090NA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640322478451,"sku":"CARRIE-PY4GNAB36090NA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_65aa7360-b99f-4850-a2f0-3aa57181ca0c.jpg?v=1775033768"},{"product_id":"carrier-py4gnab36090aa-igniter-1kzbpu","title":"OEM Carrier Silicon Nitride Hot Surface Igniter for PY4GNAB36090AA","description":"\u003cdiv class=\"product-content\"\u003e\n\u003ch1\u003eOEM Carrier Silicon Nitride Hot Surface Igniter for PY4GNAB36090AA\u003c\/h1\u003e\n\u003cp\u003eThe hot surface igniter is the ignition source for your Carrier gas furnace. On every call for heat the control board energizes the igniter, which glows to roughly 2,000°F and lights the burner gas. When it fails you'll notice the blower running but pushing cold air, the furnace clicking and trying to fire then locking out after three attempts, a delayed ignition \"poof,\" or no heat at all on the coldest nights. A cracked or worn element is the single most common cause of a no-heat service call.\n\nThis is a silicon nitride hot surface igniter, far more durable than older silicon carbide elements that crack from thermal shock and handling. Cold resistance typically reads in the 40–75 ohm range; an open circuit (OL on your meter) confirms a failed element. It is built for 120 VAC line-voltage ignition systems.\n\nIgniter resistance is matched to your control board's current limits. A generic igniter with the wrong resistance either won't glow hot enough to reliably light gas — causing rough, delayed ignition — or draws excess current that shortens the board's relay life. OEM silicon nitride elements also resist the micro-cracking that ends most generic igniters within a single heating season.\n\nInstall difficulty: 2\/5. Tools: 1\/4\" nut driver and a multimeter; allow about 20 minutes. #1 safety warning: turn off the gas supply and kill power at the furnace breaker before servicing, and never touch the element with bare fingers — skin oils create hot spots that crack the ceramic.\n\nShips same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis part is compatible with Carrier model PY4GNAB36090AA. Always verify the part number against your unit's data plate before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose OEM?\u003c\/h2\u003e\n\u003cp\u003eOEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; Returns\u003c\/h2\u003e\n\u003cp\u003eSame-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Carrier","offers":[{"title":"OEM","offer_id":62640322773363,"sku":"CARRIE-PY4GNAB36090AA-IGNITER-48VL400002","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":62640322806131,"sku":"CARRIE-PY4GNAB36090AA-IGNITER-48VL400002-GEN","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-48VL400002_07c4bd46-a7d9-4912-bb3f-28e4f60f48ca.jpg?v=1775035326"}],"url":"https:\/\/nationalhvacparts.com\/collections\/ignition.oembed?page=2","provider":"National HVAC Parts","version":"1.0","type":"link"}